TH Series Relays

Part number list

Results 16
Models table for series TH Series Relays
Part No.DatasheetProtective ConstructionTerminal TypeCoil Resistance (at 20oC)Contact ArrangementContact TypeOperating Function Rated Coil VoltageOperate (Set) Voltage (at20°C) (Initial) Release (Reset) voltage (at20°C) (Initial)Rated Operating Current [±10%] (at 20°C)Coil Resistance (At 20oC)Rated Operating Power Usable Voltage RangeHeat Resistance of TypesContact Resistance (Initial)Contact MaterialNominal Switching Capacity (Resistive Load) Contact Data: Max. Carrying CurrentMin. Switching Load (Resistive) Insulation Resistance (Min. MΩ)(Initial)Dielectric Strength (Between Open Contacts) (Initial)Dielectric Strength (Between Contacts and Coil) (Initial)Operate (Set) Time
(At Rated Coil Voltage) (At 20oC) (Initial)
Release (Reset) Time
(at Rated Coil Voltage) (at 20°C) (Initial)
Shock Resistance: DestructiveShock Resistance: Functional Vibration Resistance: FunctionalVibration Resistance: DestructiveExpected Life: Mechanical LifeExpected Life: ElectricalConditionsWeight (Typ.)Packing QuantityInner Carton (Pieces)Outer Carton (Pieces)
Flux tight
Surface-mount type
220Ω
1 Form C
Standard type (Ag alloy / Cu clad)
Single side stable
12V DC
Max. 7.7V DC
Min. 0.6V DC
54.5 mA
220Ω
655 mW
10 to 16V DC
Reflow type
Max. 50mΩ (N.O. side: typ. 4.5mΩ, N.C. side: typ. 5.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A/ 10 min (Coil applied voltage 12V DC, at 20°C)
1A 14V DC (at 20°C)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min (Detection current: 10mA)
500 Vrms for 1 min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
10 to 100 Hz, Min. 44.1 m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH
(Avoid icing and condensation)
Approx. 3 g
Tape and reel
500
2,000
Sealed
Surface-mount type
220Ω
1 Form C
Standard type (Ag alloy / Cu clad)
Single side stable
12V DC
Max. 7.7V DC
Min. 0.6V DC
54.5 mA
220Ω
655 mW
10 to 16V DC
Reflow type
Max. 50mΩ (N.O. side: typ. 4.5mΩ, N.C. side: typ. 5.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A/ 10 min (Coil applied voltage 12V DC, at 20°C)
1A 14V DC (at 20°C)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min (Detection current: 10mA)
500 Vrms for 1 min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
10 to 100 Hz, Min. 44.1 m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH
(Avoid icing and condensation)
Approx. 3 g
Tape and reel
500
2,000
Flux tight
Surface-mount type
160Ω
1 Form C
Standard type (Ag alloy / Cu clad)
Single side stable
12V DC
Max. 6.5V DC
Min. 0.6V DC
75 mA
160Ω
900 mW
10 to 16V DC
Reflow type
Max. 50mΩ (N.O. side: typ. 4.5mΩ, N.C. side: typ. 5.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A/ 10 min (Coil applied voltage 12V DC, at 20°C)
1A 14V DC (at 20°C)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min (Detection current: 10mA)
500 Vrms for 1 min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
10 to 100 Hz, Min. 44.1 m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH
(Avoid icing and condensation)
Approx. 3 g
Tape and reel
500
2,000
Flux tight
Surface-mount type
220Ω
1 Form C x 2 (10 pins)
Standard type
Single side stable
12V DC
Max. 7.7V DC
Min. 0.6V DC
54.5 mA
220Ω
655 mW
10 to 16V DC
Reflow type
Max. 50mΩ (N.O. side: typ. 4.5mΩ, N.C. side: typ. 5.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A/ 10 min (Coil applied voltage 12V DC, at 20°C)
1A 14V DC (at 20°C)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min (Detection current: 10mA)
500 Vrms for 1 min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
10 to 100 Hz, Min. 44.1 m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH
(Avoid icing and condensation)
Approx. 6 g
Tape and reel
400
2,000
Sealed
Surface-mount type
160Ω
1 Form C
Standard type (Ag alloy / Cu clad)
Single side stable
12V DC
Max. 6.5V DC
Min. 0.6V DC
75 mA
160Ω
900 mW
10 to 16V DC
Reflow type
Max. 50mΩ (N.O. side: typ. 4.5mΩ, N.C. side: typ. 5.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A/ 10 min (Coil applied voltage 12V DC, at 20°C)
1A 14V DC (at 20°C)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min (Detection current: 10mA)
500 Vrms for 1 min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
10 to 100 Hz, Min. 44.1 m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH
(Avoid icing and condensation)
Approx. 3 g
Tape and reel
500
2,000
Sealed
Surface-mount type
220Ω
1 Form C
Standard type
Single side stable
12V DC
Max. 7.7V DC
Min. 0.6V DC
54.5 mA
220Ω
655 mW
10 to 16V DC
Reflow type
Max. 50mΩ (N.O. side: typ. 4.5mΩ, N.C. side: typ. 5.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A/ 10 min (Coil applied voltage 12V DC, at 20°C)
1A 14V DC (at 20°C)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min (Detection current: 10mA)
500 Vrms for 1 min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
10 to 100 Hz, Min. 44.1 m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH
(Avoid icing and condensation)
Approx. 3 g
Tape and reel
500
2,000
Flux tight
Surface-mount type
160Ω
1 Form C
Standard type
Single side stable
12V DC
Max. 6.5V DC
Min. 0.6V DC
75 mA
160Ω
900 mW
10 to 16V DC
Reflow type
Max. 50mΩ (N.O. side: typ. 4.5mΩ, N.C. side: typ. 5.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A/ 10 min (Coil applied voltage 12V DC, at 20°C)
1A 14V DC (at 20°C)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min (Detection current: 10mA)
500 Vrms for 1 min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
10 to 100 Hz, Min. 44.1 m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH
(Avoid icing and condensation)
Approx. 3 g
Tape and reel
500
2,000
Sealed
Surface-mount type
220Ω
1 Form C x 2 (10 pins)
Standard type
Single side stable
12V DC
Max. 7.7V DC
Min. 0.6V DC
54.5 mA
220Ω
655 mW
10 to 16V DC
Reflow type
Max. 50mΩ (N.O. side: typ. 4.5mΩ, N.C. side: typ. 5.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A/ 10 min (Coil applied voltage 12V DC, at 20°C)
1A 14V DC (at 20°C)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min (Detection current: 10mA)
500 Vrms for 1 min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
10 to 100 Hz, Min. 44.1 m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH
(Avoid icing and condensation)
Approx. 6 g
Tape and reel
400
2,000
Flux tight
Surface-mount type
220Ω
1 Form C
Standard type
Single side stable
12V DC
Max. 7.7V DC
Min. 0.6V DC
54.5 mA
220Ω
655 mW
10 to 16V DC
Reflow type
Max. 50mΩ (N.O. side: typ. 4.5mΩ, N.C. side: typ. 5.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A/ 10 min (Coil applied voltage 12V DC, at 20°C)
1A 14V DC (at 20°C)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min (Detection current: 10mA)
500 Vrms for 1 min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
10 to 100 Hz, Min. 44.1 m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH
(Avoid icing and condensation)
Approx. 3 g
Tape and reel
500
2,000
Sealed
Surface-mount type
160Ω
1 Form C
Standard type
Single side stable
12V DC
Max. 6.5V DC
Min. 0.6V DC
75 mA
160Ω
900 mW
10 to 16V DC
Reflow type
Max. 50mΩ (N.O. side: typ. 4.5mΩ, N.C. side: typ. 5.5mΩ) (By voltage drop 1A 6V DC)
Ag alloy
N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
25A/ 10 min (Coil applied voltage 12V DC, at 20°C)
1A 14V DC (at 20°C)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1 min (Detection current: 10mA)
500 Vrms for 1 min (Detection current: 10mA)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (without protective element)
Min. 1,000 m/s2
(Half-wave pulse of sine wave: 6ms, number of shocks for each direction: X, Y and Z direction: 3 times)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
10 to 100 Hz, Min. 44.1 m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1 m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 107 (at 120 times/min)
[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
Ambient temperature: –40 to +110°C, Humidity: 2 to 85% RH
(Avoid icing and condensation)
Approx. 3 g
Tape and reel
500
2,000
Latest Videos

Playlist

Thumbnail for New Product Brief: EV-A Series Automotive Relay

New Product Brief: EV-A Series Automotive Relay

Thumbnail for New Product Brief: TB Series Automotive Relays

New Product Brief: TB Series Automotive Relays