TL Series

Panasonic's TL Series Automotive Relays 2 Form A offers a high load for smart J/B. The TL Series Automotive Relays have a miniature design while still being capable of switching larger capacity loads and uses a double make 1 Form U (or 2 Form A) contact arrangement. The double-make structure allows for switching capabilities of 40A. The TL Series also offers pin-in paste compliant options.

Features and Benefits:

  • Automotive Grade Relay Design
  • Small Compact Design For Space Savings
  • High Switching And Carry Current Capability For DC Loads
    • Can Meet All Resistive Switching At 14 VDC And Carry Loads Up To 40A Continuous Current
  • Capable Of Withstanding Automatic Reflow Soldering And Has A Wide Operating Ambient Temperature Rating Of -40°C to +110°C
    • Pin In Paste Compatible With High Heat Resistance
  • High Inrush Capability
    • Can Handle 70A Capacitive Loads
  • RoHS/REACH Compliant

Automotive Relays Available Through Panasonic Franchised Distributors

TL Series Automotive Relay

ACTL3CR3V Automotive Relay

The ACTL3CR3V is the only part number available for purchase in the Panasonic Automotive Relays TL Series through franchised distributors.

The TL Series ACTL3CR3V Automotive Relay has a miniature design while still being capable of switching larger capacity loads. This Relay uses a double make 1 Form U (or 2 Form A) contact arrangement. The double-make structure allows for switching capabilities of 40A @ 14VDC (40A continuous energization with make-fixed contacts connected). The ACTL3CR3V part can be used to replace micro some ISO Terminal Type Relays and is designed for use within a dedicated 12VDC power supply system.

The TL Series ACTL3CR3V part is manufactured in Vietnam.

Part Number List

Results 5
Models table for series TL Series
Part No.DatasheetRated Coil VoltageCoil Resistance (at 20oC)Heat Resistance of TypesContact ArrangementContact TypeProtective ConstructionTerminal TypeOperate (Set) Voltage (at20°C) (Initial) Operating Function Release (Reset) voltage (at20°C) (Initial)Rated Operating Current [±10%] (at 20°C)Coil Resistance (At 20oC)Rated Operating Power (at 20°C) Usable Voltage RangeContact Resistance (Initial)Contact MaterialNominal Switching Capacity (Resistive Load) Contact Data: Max. Carrying CurrentMin. Switching Load (Resistive) Insulation Resistance (Min. MΩ)(Initial)Dielectric Strength (Between Open Contacts) (Initial)Dielectric Strength (Between Contacts and Coil) (Initial)Operate (Set) Time
(At Rated Coil Voltage) (At 20oC) (Initial)
Release (Reset) Time
(at Rated Coil Voltage) (at 20°C) (Initial)
Shock Resistance: Functional Shock Resistance: DestructiveVibration Resistance: FunctionalVibration Resistance: DestructiveExpected Life: Mechanical LifeExpected Life: ElectricalConditionsWeight (Typ.)Inner Carton (Pieces)Outer Carton (Pieces)
12V DC
225 Ω
High heat-resistant type
Double make contact 2 Form A (1 Form U)
Standard type (Ag alloy / Cu clad)
Sealed
PC board type
Max. 6.5 V DC
Single side stable
Min. 0.5 V DC
53.3 mA
225 Ω
640 mW
10 to 16V DC
Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
40A 14V DC
40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1min. (Detection current: 10mA.)
500 Vrms for 1min. (Detection current: 10mA.)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (Without diode)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms)
10 to 100 Hz, Min. 44.1m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 5 x 106 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity
Operating frequency: 1s ON, 9s OFF

[Resistive and capacitor loads] Min. 105: at 90 A (Inrush), 20 A (Steady), 14 V DC
Operating frequency: 0.15s ON, 4.85s OFF
Ambient temperature: –40 to +110°C –40 to +230°F
Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
approx. 6.5g .23 oz
50
2,000
12V DC
225 Ω
Pin in Paste compliant type
Double make contact 2 Form A (1 Form U)
Standard type (Ag alloy / Cu clad)
Flux tight
PC board type
Max. 6.5 V DC
Single side stable
Min. 0.5 V DC
53.3 mA
225 Ω
640 mW
10 to 16V DC
Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
40A 14V DC
40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1min. (Detection current: 10mA.)
500 Vrms for 1min. (Detection current: 10mA.)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (Without diode)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms)
10 to 100 Hz, Min. 44.1m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 5 x 106 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity
Operating frequency: 1s ON, 9s OFF

[Resistive and capacitor loads] Min. 105: at 90 A (Inrush), 20 A (Steady), 14 V DC
Operating frequency: 0.15s ON, 4.85s OFF
Ambient temperature: –40 to +110°C –40 to +230°F
Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
approx. 6.5g .23 oz
50
2,000
12V DC
225 Ω
Pin in Paste compliant type
Double make contact 2 Form A (1 Form U)
Standard type (Ag alloy / Cu clad)
Flux tight
PC board type
Max. 6.5 V DC
Single side stable
Min. 0.5 V DC
53.3 mA
225 Ω
640 mW
10 to 16V DC
Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
40A 14V DC
40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1min. (Detection current: 10mA.)
500 Vrms for 1min. (Detection current: 10mA.)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (Without diode)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms)
10 to 100 Hz, Min. 44.1m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 5 x 106 (at 120 cpm)
[Resistive load] Min. 105 at rated switching capacity
Operating frequency: 1s ON, 9s OFF

[Resistive and capacitor loads] Min. 105: at 90 A (Inrush), 20 A (Steady), 14 V DC
Operating frequency: 0.15s ON, 4.85s OFF
Ambient temperature: –40 to +110°C –40 to +230°F
Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
approx. 6.5g .23 oz
50
2,000
12V DC
225 Ω
Pin in Paste compliant type
Double make contact 2 Form A (1 Form U)
Lamp control type (Ag alloy / Cu clad)
Flux tight
PC board type
Max. 6.5 V DC
Single side stable
Min. 0.5 V DC
53.3 mA
225 Ω
640 mW
10 to 16V DC
Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
40A 14V DC
40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1min. (Detection current: 10mA.)
500 Vrms for 1min. (Detection current: 10mA.)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (Without diode)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms)
10 to 100 Hz, Min. 44.1m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 5 x 106 (at 120 cpm)
[Lamp load] Min. 105: at 90 A (Inrush), 12 A (Steady), 14 V DC
Operating frequency: 1s ON, 14s OFF
Ambient temperature: –40 to +110°C –40 to +230°F
Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
approx. 6.5g .23 oz
50
2,000
12V DC
225 Ω
High heat-resistant type
Double make contact 2 Form A (1 Form U)
Lamp control type (Ag alloy / Cu clad)
Sealed
PC board type
Max. 6.5 V DC
Single side stable
Min. 0.5 V DC
53.3 mA
225 Ω
640 mW
10 to 16V DC
Max. 50mΩ (typ. 2mΩ) (By voltage drop 1A 6V DC)
Ag alloy
40A 14V DC
40A/1 hour (Coil applied voltage 12V DC at 20°C 68°F) (Initial)
1A 14V DC (at 20°C 68°F)
Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
500 Vrms for 1min. (Detection current: 10mA.)
500 Vrms for 1min. (Detection current: 10mA.)
Max. 10ms (without contact bounce time)
Max. 10ms (without contact bounce time) (Without diode)
Min. 100 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms)
10 to 100 Hz, Min. 44.1m/s2 (Detection time: 10µs)
10 to 500 Hz, Min. 44.1m/s2
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Min. 5 x 106 (at 120 cpm)
[Lamp load] Min. 105: at 90 A (Inrush), 12 A (Steady), 14 V DC
Operating frequency: 1s ON, 14s OFF
Ambient temperature: –40 to +110°C –40 to +230°F
Humidity: 2 to 85% R.H. (Please avoid icing or condensation)
approx. 6.5g .23 oz
50
2,000

What's New

Stay up to date