Specifications
| Item | Performance characteristics |
|---|---|
| Operating Function | 1 coil latching |
| Type Classification | Manual switch type |
| Rated Coil Voltage | 5 V DC |
| Protective Construction | Flux-resistant |
| Terminal Type | PC board terminal |
| Packing Quantity; Inner Carton (Pcs.) | 50 |
| Packing Quantity; Outer Carton (Pcs.) | 200 |
| Set Voltage | Max. 75% V of rated coil voltage (Initial) |
| Reset Voltage | Max. 75% V of rated coil voltage (Initial) |
| Rated Operating Current [±10%] (at 20°C) | Set coil: 200 mA Reset coil: 200 mA |
| Resistance [±10%] (at 20°C) | Set coil: 25 Ω Reset coil: 25 Ω |
| Rated Operating Power | 1,000 mW |
| Max. Allowable Voltage (at 20°C 68°F) | 130% V of rated coil voltage |
| Contact Arrangement | 1 Form A |
| Contact Shape | Single |
| Contact Resistance (Initial) | Max. 20 mΩ (by voltage drop 24 V DC 1 A) |
| Contact Material | AgSnO2 type |
| Contact Rating (Resistive Load) | 50 A 277 V AC |
| Max. Switching Power (Resistive Load) | 13,850 VA (50 A 277 V AC) |
| Max. Switching Voltage | 480 V AC |
| Max. Switching Current | 50 A (AC) |
| Min. Switching Load (Reference Value) | 100 mA 5 V DC |
| Insulation Resistance (Initial) | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) |
| Dielectric Strength (Initial): Between Open Contacts | 1,500 Vrms for 1 min (detection current: 10 mA) |
| Dielectric Strength (Initial): Between Contact and Coil | 4,000 Vrms for 1 min (detection current: 10 mA) |
| Surge Withstand Voltage (Initial): Between Contact and Coil | 12,000 V |
| Time (Initial) (at 20°C 68°F) (Initial) | Max. 20 ms at rated coil voltage (without bounce) |
| Reset Time (Initial) (at20°C 68°F) | Max. 20 ms at rated coil voltage (without bounce) |
| Hock Resistance (Functional) | 100 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs) |
| Hock Resistance (Destructive) | 1,000 m/s2 (half-sine shock pulse: 6 ms) |
| Vibration Resistance (Functional) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs) |
| Vibration Resistance (Destructive) | 10 to 55 Hz (at double amplitude of 2 mm) |
| Mechanical Life | Min. 106 ope. (switching frequency: at 180 times/min) |
| Conditions | Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation) |
| Weight (Typ.) | Approx. 31 g |
| Resistive Load | [switching frequency ON : OFF = 1 s : 9 s] Min. 100x103 ope. 25 A 277 V AC Min. 10x103 ope. 50 A 277 V AC |
| Inrush Load; Tungsten | [switching frequency ON : OFF = 1 s : 59 s] Min. 25x103 ope. 2,400 W 120 V AC |
| Inrush Load; Electronic Ballast | [switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ103 ope. 20 A 277 V AC |
| Inrush Load; Capacitive (IEC 60669-1) | [switching frequency ON : OFF = 1 s : 9 s] Min. 30x103 ope. 20 A 250 V AC 200 μF |
Stock check
ADJH21105
What's New
Stay up to date
Latest Videos
Playlist
Panasonic Industrial Solutions for 5G Networking Applications
New Product Spotlight: DW Series Relays
New Product Spotlight: PA-N Series General Power Relays
New Product Introduction: HE-R Series General Power Relays
New Product Introduction: HE Series Power Relay PV Type 90A Wide Gap
New Product Introduction: DS-P Series
New Product Information: LQ Series Relays
