| | 6 V DC | 200 mW | Flux-resistant | Single side stable | PC board terminal | Flat type | Class E insulation | 100 | 1,000 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 33.3 mA | 180 Î© | 150% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA, 300 W | 16 A 125 V AC, 10 A 277 V AC, 10 A 30 V DC | 277 V AC, 110 V DC (0.3 A) | 16 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 2,500 Vrms for 1 min (detection current: 10 mA) | 4,500 V | Max. 5 ms at rated coil voltage (without bounce, without diode) | Max. 12 ms (4.5 to 48 VDC) at rated coil voltage (without bounce) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 20x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 125 V AC Min. 100x10^{3} ope. 10 A 30 V DC Min. 50x10^{3} ope. 10 A 277 V AC Min. 30x10^{3} ope. 16 A 125 V AC | Carton |

| | 4.5 V DC | 200 mW | Flux-resistant | Single side stable | PC board terminal | Flat type | Class E insulation | 100 | 1,000 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 44.4 mA | 101 Î© | 150% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA, 300 W | 16 A 125 V AC, 10 A 277 V AC, 10 A 30 V DC | 277 V AC, 110 V DC (0.3 A) | 16 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 2,500 Vrms for 1 min (detection current: 10 mA) | 4,500 V | Max. 5 ms at rated coil voltage (without bounce, without diode) | Max. 12 ms (4.5 to 48 VDC) at rated coil voltage (without bounce) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 20x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 125 V AC Min. 100x10^{3} ope. 10 A 30 V DC Min. 50x10^{3} ope. 10 A 277 V AC Min. 30x10^{3} ope. 16 A 125 V AC | Carton |

| | 24 V DC | 200 mW | Flux-resistant | Single side stable | PC board terminal | Flat type | Class E insulation | 100 | 1,000 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 8.3 mA | 2,880 Î© | 150% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA, 300 W | 16 A 125 V AC, 10 A 277 V AC, 10 A 30 V DC | 277 V AC, 110 V DC (0.3 A) | 16 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 2,500 Vrms for 1 min (detection current: 10 mA) | 4,500 V | Max. 5 ms at rated coil voltage (without bounce, without diode) | Max. 12 ms (4.5 to 48 VDC) at rated coil voltage (without bounce) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 20x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 125 V AC Min. 100x10^{3} ope. 10 A 30 V DC Min. 50x10^{3} ope. 10 A 277 V AC Min. 30x10^{3} ope. 16 A 125 V AC | Carton |

| | 9 V DC | 200 mW | Flux-resistant | Single side stable | PC board terminal | Flat type | Class E insulation | 100 | 1,000 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 22.2 mA | 405 Î© | 150% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA, 300 W | 16 A 125 V AC, 10 A 277 V AC, 10 A 30 V DC | 277 V AC, 110 V DC (0.3 A) | 16 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 2,500 Vrms for 1 min (detection current: 10 mA) | 4,500 V | Max. 5 ms at rated coil voltage (without bounce, without diode) | Max. 12 ms (4.5 to 48 VDC) at rated coil voltage (without bounce) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 20x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 125 V AC Min. 100x10^{3} ope. 10 A 30 V DC Min. 50x10^{3} ope. 10 A 277 V AC Min. 30x10^{3} ope. 16 A 125 V AC | Carton |

| | 12 V DC | 200 mW | Flux-resistant | Single side stable | PC board terminal | Flat type | Class E insulation | 100 | 1,000 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 16.7 mA | 720 Î© | 150% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA, 300 W | 16 A 125 V AC, 10 A 277 V AC, 10 A 30 V DC | 277 V AC, 110 V DC (0.3 A) | 16 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 2,500 Vrms for 1 min (detection current: 10 mA) | 4,500 V | Max. 5 ms at rated coil voltage (without bounce, without diode) | Max. 12 ms (4.5 to 48 VDC) at rated coil voltage (without bounce) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 20x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 125 V AC Min. 100x10^{3} ope. 10 A 30 V DC Min. 50x10^{3} ope. 10 A 277 V AC Min. 30x10^{3} ope. 16 A 125 V AC | Carton |

| | 100 V DC | 600 mW | Flux-resistant | Single side stable | PC board terminal | Flat type | Class E insulation | 100 | 1,000 | Max. 60 V DC (Initial) | Min. 4 V DC (Initial) | 6 mA | 16,600 Î© | 110 V DC | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA, 300 W | 16 A 125 V AC, 10 A 277 V AC, 10 A 30 V DC | 277 V AC, 110 V DC (0.3 A) | 16 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 2,500 Vrms for 1 min (detection current: 10 mA) | 4,500 V | Max. 5 ms at rated coil voltage (without bounce, without diode) | Max. 8 ms (100 V DC) at rated coil voltage (without bounce) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 20x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 125 V AC Min. 100x10^{3} ope. 10 A 30 V DC Min. 50x10^{3} ope. 10 A 277 V AC Min. 30x10^{3} ope. 16 A 125 V AC | Carton |

| | 48 V DC | 200 mW | Flux-resistant | Single side stable | PC board terminal | Flat type | Class E insulation | 100 | 1,000 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 4.2 mA | 11,520 Î© | 150% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA, 300 W | 16 A 125 V AC, 10 A 277 V AC, 10 A 30 V DC | 277 V AC, 110 V DC (0.3 A) | 16 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 2,500 Vrms for 1 min (detection current: 10 mA) | 4,500 V | Max. 5 ms at rated coil voltage (without bounce, without diode) | Max. 12 ms (4.5 to 48 VDC) at rated coil voltage (without bounce) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 20x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 125 V AC Min. 100x10^{3} ope. 10 A 30 V DC Min. 50x10^{3} ope. 10 A 277 V AC Min. 30x10^{3} ope. 16 A 125 V AC | Carton |

| | 18 V DC | 200 mW | Flux-resistant | Single side stable | PC board terminal | Flat type | Class E insulation | 100 | 1,000 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 11.1 mA | 1,620 Î© | 150% V of rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA, 300 W | 16 A 125 V AC, 10 A 277 V AC, 10 A 30 V DC | 277 V AC, 110 V DC (0.3 A) | 16 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 2,500 Vrms for 1 min (detection current: 10 mA) | 4,500 V | Max. 5 ms at rated coil voltage (without bounce, without diode) | Max. 12 ms (4.5 to 48 VDC) at rated coil voltage (without bounce) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2 mm) | Min. 20x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 8 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 125 V AC Min. 100x10^{3} ope. 10 A 30 V DC Min. 50x10^{3} ope. 10 A 277 V AC Min. 30x10^{3} ope. 16 A 125 V AC | Carton |