| | Tab terminal (TMP type) | 24 V DC | 1 Form A | Flux-resistant | Single side stable | Class E insulation | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 50 | Max. 70% V of rated coil voltage (Initial) | 200 | Min. 10% V of rated coil voltage (Initial) | 37.5 mA | 640 Î© | 900 mW | 110% V of rated coil voltage (at 60Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 20 A 250 V AC | 6,250 VA | 250 V AC | 25 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | Max. 15 ms at rated coil voltage (without bounce, with diode) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 23 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 20 A 250 V AC (cosÎ¦ = 1.0) Min. 10x10^{3} ope. 25 A 250 V AC (cosÎ¦ = 1.0) | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. Inrush 70 A (cosÎ¦ = 0.7), Steady 20 A (cosÎ¦ = 0.9) 250 V AC | [at 20Â°C, switching frequency: 10 times/min] Min. 30x10^{3} ope. Inrush 200 A, Steady 20 A 100 V AC Min. 30x10^{3} ope. Inrush 100 A, Steady 10 A 200 V AC |

| | Tab terminal (TMP type) | 12 V DC | 1 Form A | Flux-resistant | Single side stable | Class E insulation | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 50 | Max. 70% V of rated coil voltage (Initial) | 200 | Min. 10% V of rated coil voltage (Initial) | 75 mA | 160 Î© | 900 mW | 110% V of rated coil voltage (at 60Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 20 A 250 V AC | 6,250 VA | 250 V AC | 25 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | Max. 15 ms at rated coil voltage (without bounce, with diode) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 23 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 20 A 250 V AC (cosÎ¦ = 1.0) Min. 10x10^{3} ope. 25 A 250 V AC (cosÎ¦ = 1.0) | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. Inrush 70 A (cosÎ¦ = 0.7), Steady 20 A (cosÎ¦ = 0.9) 250 V AC | [at 20Â°C, switching frequency: 10 times/min] Min. 30x10^{3} ope. Inrush 200 A, Steady 20 A 100 V AC Min. 30x10^{3} ope. Inrush 100 A, Steady 10 A 200 V AC |

| | Tab terminal (TMP type) | 5 V DC | 1 Form A | Flux-resistant | Single side stable | Class E insulation | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 50 | Max. 70% V of rated coil voltage (Initial) | 200 | Min. 10% V of rated coil voltage (Initial) | 180 mA | 27.8 Î© | 900 mW | 110% V of rated coil voltage (at 60Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 20 A 250 V AC | 6,250 VA | 250 V AC | 25 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | Max. 15 ms at rated coil voltage (without bounce, with diode) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 23 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 20 A 250 V AC (cosÎ¦ = 1.0) Min. 10x10^{3} ope. 25 A 250 V AC (cosÎ¦ = 1.0) | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. Inrush 70 A (cosÎ¦ = 0.7), Steady 20 A (cosÎ¦ = 0.9) 250 V AC | [at 20Â°C, switching frequency: 10 times/min] Min. 30x10^{3} ope. Inrush 200 A, Steady 20 A 100 V AC Min. 30x10^{3} ope. Inrush 100 A, Steady 10 A 200 V AC |

| | Tab terminal (TMP type) | 9 V DC | 1 Form A | Flux-resistant | Single side stable | Class E insulation | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 50 | Max. 70% V of rated coil voltage (Initial) | 200 | Min. 10% V of rated coil voltage (Initial) | 100 mA | 90 Î© | 900 mW | 110% V of rated coil voltage (at 60Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 20 A 250 V AC | 6,250 VA | 250 V AC | 25 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | Max. 15 ms at rated coil voltage (without bounce, with diode) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 23 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 20 A 250 V AC (cosÎ¦ = 1.0) Min. 10x10^{3} ope. 25 A 250 V AC (cosÎ¦ = 1.0) | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. Inrush 70 A (cosÎ¦ = 0.7), Steady 20 A (cosÎ¦ = 0.9) 250 V AC | [at 20Â°C, switching frequency: 10 times/min] Min. 30x10^{3} ope. Inrush 200 A, Steady 20 A 100 V AC Min. 30x10^{3} ope. Inrush 100 A, Steady 10 A 200 V AC |

| | PC board terminal | 5 V DC | 1 Form A | Flux-resistant | Single side stable | Class E insulation | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 50 | Max. 70% V of rated coil voltage (Initial) | 200 | Min. 10% V of rated coil voltage (Initial) | 180 mA | 27.8 Î© | 900 mW | 110% V of rated coil voltage (at 60Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 20 A 250 V AC | 6,250 VA | 250 V AC | 25 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | Max. 15 ms at rated coil voltage (without bounce, with diode) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 23 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 20 A 250 V AC (cosÎ¦ = 1.0) Min. 10x10^{3} ope. 25 A 250 V AC (cosÎ¦ = 1.0) | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. Inrush 70 A (cosÎ¦ = 0.7), Steady 20 A (cosÎ¦ = 0.9) 250 V AC | [at 20Â°C, switching frequency: 10 times/min] Min. 30x10^{3} ope. Inrush 200 A, Steady 20 A 100 V AC Min. 30x10^{3} ope. Inrush 100 A, Steady 10 A 200 V AC |

| | PC board terminal | 12 V DC | 1 Form A | Flux-resistant | Single side stable | Class E insulation | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 50 | Max. 70% V of rated coil voltage (Initial) | 200 | Min. 10% V of rated coil voltage (Initial) | 75 mA | 160 Î© | 900 mW | 110% V of rated coil voltage (at 60Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 20 A 250 V AC | 6,250 VA | 250 V AC | 25 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | Max. 15 ms at rated coil voltage (without bounce, with diode) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 23 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 20 A 250 V AC (cosÎ¦ = 1.0) Min. 10x10^{3} ope. 25 A 250 V AC (cosÎ¦ = 1.0) | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. Inrush 70 A (cosÎ¦ = 0.7), Steady 20 A (cosÎ¦ = 0.9) 250 V AC | [at 20Â°C, switching frequency: 10 times/min] Min. 30x10^{3} ope. Inrush 200 A, Steady 20 A 100 V AC Min. 30x10^{3} ope. Inrush 100 A, Steady 10 A 200 V AC |

| | PC board terminal | 9 V DC | 1 Form A | Flux-resistant | Single side stable | Class E insulation | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 50 | Max. 70% V of rated coil voltage (Initial) | 200 | Min. 10% V of rated coil voltage (Initial) | 100 mA | 90 Î© | 900 mW | 110% V of rated coil voltage (at 60Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 20 A 250 V AC | 6,250 VA | 250 V AC | 25 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | Max. 15 ms at rated coil voltage (without bounce, with diode) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 23 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 20 A 250 V AC (cosÎ¦ = 1.0) Min. 10x10^{3} ope. 25 A 250 V AC (cosÎ¦ = 1.0) | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. Inrush 70 A (cosÎ¦ = 0.7), Steady 20 A (cosÎ¦ = 0.9) 250 V AC | [at 20Â°C, switching frequency: 10 times/min] Min. 30x10^{3} ope. Inrush 200 A, Steady 20 A 100 V AC Min. 30x10^{3} ope. Inrush 100 A, Steady 10 A 200 V AC |

| | Tab terminal (TMP type) | 18 V DC | 1 Form A | Flux-resistant | Single side stable | Class E insulation | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 50 | Max. 70% V of rated coil voltage (Initial) | 200 | Min. 10% V of rated coil voltage (Initial) | 50 mA | 360 Î© | 900 mW | 110% V of rated coil voltage (at 60Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 20 A 250 V AC | 6,250 VA | 250 V AC | 25 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | Max. 15 ms at rated coil voltage (without bounce, with diode) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 23 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 20 A 250 V AC (cosÎ¦ = 1.0) Min. 10x10^{3} ope. 25 A 250 V AC (cosÎ¦ = 1.0) | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. Inrush 70 A (cosÎ¦ = 0.7), Steady 20 A (cosÎ¦ = 0.9) 250 V AC | [at 20Â°C, switching frequency: 10 times/min] Min. 30x10^{3} ope. Inrush 200 A, Steady 20 A 100 V AC Min. 30x10^{3} ope. Inrush 100 A, Steady 10 A 200 V AC |

| | Tab terminal (TMP type) | 6 V DC | 1 Form A | Flux-resistant | Single side stable | Class E insulation | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 50 | Max. 70% V of rated coil voltage (Initial) | 200 | Min. 10% V of rated coil voltage (Initial) | 150 mA | 40 Î© | 900 mW | 110% V of rated coil voltage (at 60Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 20 A 250 V AC | 6,250 VA | 250 V AC | 25 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | Max. 15 ms at rated coil voltage (without bounce, with diode) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 23 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 20 A 250 V AC (cosÎ¦ = 1.0) Min. 10x10^{3} ope. 25 A 250 V AC (cosÎ¦ = 1.0) | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. Inrush 70 A (cosÎ¦ = 0.7), Steady 20 A (cosÎ¦ = 0.9) 250 V AC | [at 20Â°C, switching frequency: 10 times/min] Min. 30x10^{3} ope. Inrush 200 A, Steady 20 A 100 V AC Min. 30x10^{3} ope. Inrush 100 A, Steady 10 A 200 V AC |

| | PC board terminal | 24 V DC | 1 Form A | Flux-resistant | Single side stable | Class E insulation | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 50 | Max. 70% V of rated coil voltage (Initial) | 200 | Min. 10% V of rated coil voltage (Initial) | 37.5 mA | 640 Î© | 900 mW | 110% V of rated coil voltage (at 60Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 20 A 250 V AC | 6,250 VA | 250 V AC | 25 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | Max. 15 ms at rated coil voltage (without bounce, with diode) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 23 g | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. 20 A 250 V AC (cosÎ¦ = 1.0) Min. 10x10^{3} ope. 25 A 250 V AC (cosÎ¦ = 1.0) | [at 20Â°C, switching frequency: 20 times/min] Min. 100x10^{3} ope. Inrush 70 A (cosÎ¦ = 0.7), Steady 20 A (cosÎ¦ = 0.9) 250 V AC | [at 20Â°C, switching frequency: 10 times/min] Min. 30x10^{3} ope. Inrush 200 A, Steady 20 A 100 V AC Min. 30x10^{3} ope. Inrush 100 A, Steady 10 A 200 V AC |