PAN1770 Series Bluetooth® 5.3 Low Energy RF Module

Panasonic's Bluetooth 5.3 Low Energy RF Module is Equipped with an ARM Cortex®-M4F Microcontroller Based on the Nordic nRF52840 Chipset and can have an External Antenna Attachment via uFL

The PAN1770 Series Bluetooth 5.3 Low Energy RF Module based on the Nordic nRF52840 single-chip controller features a higher symbol rate of 2 Mbps using the high-speed LE 2M PHY, or a significantly longer range using the LE-coded PHY at 500 kb/s or 125 kb/s. The new channel selection algorithm (CSA#2) improves performance in high-interference environments. Furthermore, the new LE advertising extensions allow for more significant amounts of data in connectionless scenarios.

The PAN1770 Series provides an output power of up to 8 dBm, and the high sensitivity of the nRF52840, in combination with the LE-coded PHY, makes the module very attractive in applications where a long range is required. In addition, the ultra-low current consumption of the PAN1770 Series makes the module an ideal choice for battery-powered devices. With the Cortex®-M4F processor, 256 kB RAM, and the built-in 1 MB flash memory, the PAN1770 Series can easily be used in standalone mode, eliminating the need for an external processor, saving complexity, space and cost. The rich set of security features from the ARM TrustZone CryptoCell 310 security subsystem provides the necessary means for secure device operation in the IoT space. The PAN1770 Series also supports Type 2 Near Field Communication (NFC-A) for simplified pairing and payment solutions (external antenna required).

General Features and Benefits

  • Bluetooth® 5.3 (Long Range, 2Mbps PHY)
  • ARM® Cortex®-M4F Processor (64MHZ) with 1 MB flash memory and 256 kB internal RAM
  • Includes ARM® TrustZone® Cryptocell 310 and supports secure boot including Root-of-Trust
  • New channel selection algorithm (CSA#2) improves the performance in high-interference environments
  • Up to 48× General Purpose I/Os (GPIO), which are shared by up to 4× SPI, 2× I²C, 2× UART, 4× PWM, 8× ADC, NFC-A, 32 kHz IN/OUT, nRESET
  • USB 2.0 full-speed device interface
  • REACH and RoHS Compliant
  • Over-the-air update of application software

Block Diagram

pan1770 block diagram

Technical Characteristics

  • Surface Mount Type (SMT) 15.6 mm x 8.7 mm x 2.05 mm
  • Typical max. output power 8 dBm, configurable from -20 dBm in 4dB steps
  • Sensitivity -95 dBm @ 1 Mb/s and -103 dBm @ 125 kb/s
  • Current consumption of 4.8 mA in TX (@ 0 dBm) and 4.8 mA in RX mode
  • On-module DC-DC and LDO regulators with automated low current modes
  • Voltage range: 1.7 V to 5.5 V
  • Typical current consumption: 0.4 µA in System OFF mode, 1.5 µA with RTC wake up
  • Temperature range: -40 °C to 85 °C
  • Certified Antenna list

 

Series image for PAN1770 Series

PAN1770 Series

Part number list

Results 2
Models table for series PAN1770 Series
Part No.DatasheetSize (mm) (mm)Used ICRx Sensitivity (dBm)Programmable Tx Power (Max.) Operating Temp.Current Consum.Frequency RangeDate Rate (Max. Air)
15.6 x 8.7 x 2.05
nRF52840 featuring ARM Cortex-M4F with 64 MHz
 -95 dBm at 1 Mb/s and -103 dBm at 125 kb/s
8 dBm (configurable from -20 dBm in 4 dB steps and -40 dBm in whisper mode)
-40 to +85 °C
4.8 mA in Tx (at 0 dBm) and 4.8 mA in Rx mode
2.400–2.4835 GHz ISM band
2Mbps
15.6 x 8.7 x 2.05
nRF52840 featuring ARM Cortex-M4F with 64 MHz
 -95 dBm at 1 Mb/s and -103 dBm at 125 kb/s
8 dBm (configurable from -20 dBm in 4 dB steps and -40 dBm in whisper mode)
-40 to +85 °C
4.8 mA in Tx (at 0 dBm) and 4.8 mA in Rx mode
2.400–2.4835 GHz ISM band
2Mbps

Learn About the Pan1770 Series Evaluation Board

PAN1770 Eval Board
The evaluation board features a PAN1770 Bluetooth® 5.3 Low Energy (LE) module which is based on the Nordic Semiconductor nRF52840 single-chip controller.

The PAN1770 Evaluation Kit is an all-inclusive and comprehensive evaluation kit available to support rapid prototyping with the PAN1770 Series RF Module. The Evaluation Boards are delivered without any preinstalled software examples, but an integration guide is available explaining how to use the recommended development environment.

PAN1770 Series Evaluation Boards feature two Part Numbers: ENW89854CXKF (Standard) and ENW89854CZKF (APPROTECT)

Latest Videos

Playlist

Thumbnail for Bluetooth Low Energy Modules Overview

Bluetooth Low Energy Modules Overview

Thumbnail for Ask the Engineers - PAN1720 Bluetooth Module

Ask the Engineers - PAN1720 Bluetooth Module

Thumbnail for PAN1740 Bluetooth Module Quick Start

PAN1740 Bluetooth Module Quick Start

Thumbnail for Quick Clips: PAN1762 Series Bluetooth® 5.0 Low Energy RF Module

Quick Clips: PAN1762 Series Bluetooth® 5.0 Low Energy RF Module

Thumbnail for Quick Clips: PAN1780 Series Bluetooth® 5.0 Low Energy

Quick Clips: PAN1780 Series Bluetooth® 5.0 Low Energy

Thumbnail for NPI: PAN1781 Series Bluetooth® 5 Low Energy Module and Evaluation Kit

NPI: PAN1781 Series Bluetooth® 5 Low Energy Module and Evaluation Kit

Thumbnail for New Product Brief: PAN1770 Series Bluetooth® Low Energy RF Module

New Product Brief: PAN1770 Series Bluetooth® Low Energy RF Module

Thumbnail for New Product Introduction: PAN1770 Series Bluetooth® 5.3 Low Energy RF Module

New Product Introduction: PAN1770 Series Bluetooth® 5.3 Low Energy RF Module

Thumbnail for New Product Introduction: PAN1782 Series Bluetooth® 5.3 Low Energy Module

New Product Introduction: PAN1782 Series Bluetooth® 5.3 Low Energy Module

Thumbnail for Autonomous Vehicle Applications: PAN1781 Series

Autonomous Vehicle Applications: PAN1781 Series