PAN1740 Series

Bluetooth Smart With A 5mA Current Consumption In Tx Or Rx!

Panasonic’s “nanopower” family of 2nd generation Bluetooth Low Energy RF Modules reduces transmit and receives current consumption by more than 66% when compared to the current generation of BLE. The low power consumption allows for the use of coin cell Batteries and reduces Battery requirements up to 50% without range reduction, Tx power reduction or changes to the Bluetooth specification.

Panasonic cost engineering lowers component count and the application BOM.

With a fully shielded case, integrated crystal oscillators and chip antenna, the 9.0 x 9.5 x 1.8 mm footprint of the PAN1740 Series makes it one of the smallest BLE RF Modules available. Also, the PAN1740 RF Module powers Panasonic's recent Bluetooth Low Energy PAN1740 Beacon.

Features

Bluetooth Smart® Module
Tx Current @ 0dBm: 5mA
Small Footprint: 9 x 9.5 x 1.8mm
High Sensitivity: -93dbm typ.
Output Power Up to 0dbm
Embedded BLE Stack and GATT Profile
Industrial Temperature Range: -40 to 85°C
Two Internal Crystal Oscillators
Integrated Antenna

PAN1740 Series Evaluation Kit

PAN1740 Series Experimenter Kit

PAN1740 Series Beacon Experimenter Kit

PAN1740 Series

Part number list

Results 1

Models table for series PAN1740 Series
Part No.	Datasheet	Size (mm) (mm)	Used ICs	Rx Sensitivity (dBm)	Tx Power (Max.)	Operating Temp.	Current Consum.	Frequency Range	Date Rate (Max. Air)
ENW-89846A1KF		9.0 x 9.5 x 1.8	Dialog	-93 @ BER 1%	0 dBm	-40 to +85° C	Tx/Rx 4.9mA	2.4 GHz	1 MBit/s (gross)

Models table for series PAN1740 Series
Part No.	Datasheet	Size (mm) (mm)	Used ICs	Rx Sensitivity (dBm)	Tx Power (Max.)	Operating Temp.	Current Consum.	Frequency Range	Date Rate (Max. Air)
ENW-89846A1KF		9.0 x 9.5 x 1.8	Dialog	-93 @ BER 1%	0 dBm	-40 to +85° C	Tx/Rx 4.9mA	2.4 GHz	1 MBit/s (gross)

PAN1781 Series Bluetooth® 5.3 Low Energy Module

For IoT Applications Where Long Range Is Required

Panasonic’s newest high technology Bluetooth 5.3 Low Energy Module device featuring the Nordic nRF52820 Single-Chip Controller! With a Cortex^® M4 processor, 32kB RAM, and the built-in 256 kB flash memory, the PAN1781 Series RF Module can easily be used in standalone mode to eliminate the need for an external processor, saving complexity, space, and cost. An output power of up to 8 dBm and the high sensitivity of the nRF52820 in combination with the LE coded PHY make the NEW PAN1781 Series RF Module very attractive in applications where a long range is required. The PAN1781 Series RF Module also supports Bluetooth Mesh, Thread, and Zigbee Mesh Protocols.

Learn More