PAN1327/1317 Series
SUGGESTED REPLACEMENT: PAN1326B/1316B SERIES
Ultra-Low Power Wireless Networking Solutions For Short Range Applications.
The PAN1327/1317 Series has been Not Recommended For New Design. Please consult Panasonic Not Recommended For New Design Product Notice For PAN1760, PAN1327/1317, PAN1326/1316, PAN1323, PAN1325A/1315A, PAN1325B/1315B, PAN1555/1455 Series and Evaluation Kits NRFND.PG15.07.09.2018 for Affected Part Numbers.
Panasonic's PAN1327/1317 Series RF Modules featuring both Dynastream's ANT wireless protocol and Bluetooth connectivity. This powerful new technology combination creates a low cost, ultra-low power wireless networking solution for short range applications.
The ANT protocol is perfectly suited for low data rate sensor network topologies in personal area networks (PANs) and practical wireless sensor networks (WSN's). The PAN1327/1317 provides a building block for ANT+™ devices, allowing the creation of interoperable products through implementation of ANT+ device profiles. ANT+ managed network software facilitates the collection, automatic transfer and tracking of sensor data for monitoring personal wellness information. ANT applications are most commonly found in sports and low power medical devices.
The PAN1327/1317 Host Controlled Interface (HCI) Series also brings Texas Instrument's CC2567, to an easy-to-use module format. Panasonic's tiny footprint technology offers a module of only 85.5 mm2 including antenna. The modules are designed to accommodate PCBs pad pitch of 1.3mm and as little as two layers for easy implementation and manufacture.
Features
- Best-in-class Bluetooth RF performance (Tx power, Rx sensitivity, blocking)
- Fully Qualified Bluetooth v4.0 EDR
- Dimensions PAN1327: 9mm x 9.5mm x 1.8mm (width x length x height)
- Dimensions PAN1317: 6.5mm x 9mm x 1.7mm (width x length x height)
- Certifications: Bluetooth, FCC, IC and CE
- Operating Temperature Range: -40°C to +85°C
- Supply Voltage Range: 1.7 - 4.8V
- Profiles: SPP, A2DP and AVRCP
- Based upon TI's CC2567
- Integrates with TI's ultra low-power MSP430 microprocessor
- Very fast algorithm for both ACL and eSCO
- Supports Extended Range Tx power with 10dBm typical output
- Low power scan method for page and inquiry scans at 1/3rd normal power
Interfaces
The PAN1327/PAN1317 Series Host Controlled Interface supports several transport layers with the following features:
- UART Rates of up to 4Mbps
- Three and Four Wire UART Transport
To Access Wireless Connectivity Engineering Tools, please click here.
PAN1781 Series Bluetooth® 5 Low Energy Module
For IoT Applications Where Long Range Is Required
Panasonic’s newest high technology Bluetooth 5 Low Energy Module device featuring the Nordic nRF52820 Single-Chip Controller! With a Cortex® M4 processor, 32kB RAM, and the built-in 256 kB flash memory, the PAN1781 Series RF Module can easily be used in standalone mode to eliminate the need for an external processor, saving complexity, space, and cost. An output power of up to 8 dBm and the high sensitivity of the nRF52820 in combination with the LE coded PHY make the NEW PAN1781 Series RF Module very attractive in applications where a long range is required. The PAN1781 Series RF Module also supports Bluetooth Mesh, Thread and Zigbee Mesh Protocols.
