PAN9026 Series Evaluation Kit
The PAN9026 Evaluation Kit (ENWF9201AXEF) contains two PAN9026 SDIO-Adapters packaged in a small case. The adapter has a SDIO interface and allows hardware access to the module pins. The kit is designed to be used with a Linux / Android system having installed the SW packages and Kernel drivers available at the Marvell XtraNet. The PAN9026 Evaluation Kit includes one micro SD-adapter FCC version, one i.MX-WB-IMX6 Cortex-A9 platform, one microSD card with Yocto Linux XFCE desktop environment image, and one adapter cable USB-A to DC 5.5/2.5mm plug. Check Stock on the PAN9026 Evaluation Kit!
More About the PAN9026 Series
The PAN9026 Series is a dual-band 2.4/5 GHz 802.11 a/b/g/n Wi-Fi Radio Module with integrated Bluetooth BDR/EDR/LE, specifically designed for highly integrated and cost-effective applications. The simultaneous and independent operation of the two standards enables high data rates (802.11n) and low-power operation (Bluetooth Low Energy).
Features:
- Dual Band 2.4/5 GHz 802.11 a/b/g/n Wi-Fi/BT Combo Module
- Supports 802.11i Security Standards Through AES, CCMP and More Security Mechanisms
- 802.11e Quality of Service is Supported for Multimedia Applications
- IEEE 802.11n-Compliant, 1x1 Spatial Stream with Data Rates up to MCS7 150 Mbps
PAN9026 Block Diagram
PAN9026 Series Evaluation Kit
Other Wireless Connectivity Solutions
Panasonic’s New 2.4 GHz 802.11 b/g/n PAN9520 Series Embedded Wi-Fi RF Module based on Espressif ESP32-S2 that includes the powerful Xtensa® 32-bit LX7 CPU. Although the new PAN9520 Series is one of the smallest RF Modules on the market, it offers a rich set of peripherals like full-speed USB OTG, SPI, UART, I2C, and much more. The PAN9520 Evaluation Kit is an all-inclusive and comprehensive Evaluation Kit that supports the Espressif Integrated Development Framework (ESP-IDF). It is an Arduino form factor board that has a PAN9520 RF Module with 4MB or 1MB of Flash memory, a 40MHz crystal oscillator and a chip antenna onboard.