PAN4561L Series

Panasonic, a worldwide leader in Wireless Products introduces the NEW PAN4561L Series of Mesh Networking RF Modules. These cost engineered modules are designed for applications of up to 100 feet in range where low power consumption is a requirement. PAN4561L modules are short range alternatives to Panasonic's original extended range PAN4561 Series devices.

The PAN4561L Series can be transformed from simple point-to-point proprietary devices to complex mesh networks by choosing from an array of simple firmware options. Fully featured with 39 I/O lines, sharing a common 62-pin footprint and software, each model hosts the FreeScale MC13213 Software-on-a-chip (SOC), using the same eight-bit GT60 processor as Panasonic's popular PAN4555 and making the product family application-compatible. Optional Synapse SNAP® firmware provides a highly flexible, industry-leading solution for mesh networking with a complete network development environment. Multiple antenna options are available. The Series has FCC, IC, and ETSI certifications.


  • Factory Automation and Control
  • Home Gateways/Home Automation and Control
  • Motor/Lighting Control
  • Inventory and Logistics Management
  • HID (Human Interface Devices)
  • Toys
  • Remote Control and Wire Replacement for Industrial Systems (Wireless Sensor Networks)
  • RFID Tagging
  • Automated Meter Reading
  • Monitoring (Environmental, Patient, Fitness)
  • Proprietary Networking Solutions Using IEEE802.15.4

Product Performance

  • Small Size: 35mm X 15mm X 3.5mm
  • 3 Antenna Options: Single Port 50Ω, Ceramic Antenna or SMD Output
  • Low Power Modes For Increased Battery Life
  • 16 Selectable Channels w/ 250 Kbps (2.4 GHz)
  • High Sensitivity: -92 dBm Typical At 1% Packet Error Rate
  • 20 Dbm Typical Output Power Programmable Over 30 dB Range
  • Low Supply Voltage: 2.7 V To 3.3 V (3.0 V Typical)
  • Operating Temperature Range: -40°C To +85°C
  • Link Quality And Clear Channel Assessment Capability
  • 60k Flash And 4k RAM Memory
  • Two Uarts And One I2C Bus
  • 8 Channel A/D Converter with 10 Bit for Fast and Easy Analog Input Conversion (Temperature, Pressure and Fluid Levels) to Digital Values
  • 5 Channel 16 Bit Timer/Pulse Width Modulation (Tpm) Outputs
  • BDM Port For Direct Download Programming
  • 33 Digital I/O Lines With Programmable Pull-Ups And Several With High-Current Driver

What's New

Stay up to date