| | Single side stable | Plug-in terminal | 6 V DC | 2 Form C | Dust Cover | Terminal and mounting board are available. | 20 | 200 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 50 mA | 120 Ω | 300 mW | 150% V of rated coil voltage | Twin | Max. 30 mΩ (by voltage drop 6 V DC 1 A) | Stationary contact: Au flashed AgSnO2 type Movable contact: AgSnO2 type | 15 A 250 V AC, 10 A 30 V DC | 3,750 VA, 300 W | 250 V AC, 30 V DC (48 V DC: Max. 2 A) | 15 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,500 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | Max. 50 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 392 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -50 to +60°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 50 g | [switching frequency: at 20 times/min] Min. 100x103 ope. 15 A 250 V AC Min. 100x103 ope. 10 A 30 V DC | | | | |
| | 2 coil latching | Plug-in terminal | 6 V DC | 4 Form C | Dust Cover | Terminal and mounting board are available. | 10 | 100 | | | Set coil: 50 mA Reset coil: 50 mA | Set coil: 120 Ω Reset coil: 120 Ω | 300 mW | 150% V of rated coil voltage | Twin | Max. 30 mΩ (by voltage drop 6 V DC 1 A) | Stationary contact: Au flashed AgSnO2 type Movable contact: AgSnO2 type | 10 A 250 V AC, 10 A 30 V DC | 2,500 VA, 300 W | 250 V AC, 30 V DC (48 V DC: Max. 2 A) | 10 A | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,500 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | | | 392 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -50 to +60°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 65 g | [switching frequency: at 20 times/min] Min. 100x103 ope. 10 A 250 V AC Min. 100x103 ope. 10 A 30 V DC | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Max. 50 ms at rated coil voltage (without bounce) | Max. 50 ms at rated coil voltage (without bounce, without diode) |
| | 2 coil latching | Plug-in terminal | 12 V DC | 2 Form C | Dust Cover | Terminal and mounting board are available. | 20 | 200 | | | Set coil: 25 mA Reset coil: 25 mA | Set coil: 480 Ω Reset coil: 480 Ω | 300 mW | 150% V of rated coil voltage | Twin | Max. 30 mΩ (by voltage drop 6 V DC 1 A) | Stationary contact: Au flashed AgSnO2 type Movable contact: AgSnO2 type | 15 A 250 V AC, 10 A 30 V DC | 3,750 VA, 300 W | 250 V AC, 30 V DC (48 V DC: Max. 2 A) | 15 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,500 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | | | 392 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -50 to +60°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 50 g | [switching frequency: at 20 times/min] Min. 100x103 ope. 15 A 250 V AC Min. 100x103 ope. 10 A 30 V DC | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Max. 50 ms at rated coil voltage (without bounce) | Max. 50 ms at rated coil voltage (without bounce, without diode) |
| | Single side stable | Plug-in terminal | 3 V DC | 2 Form C | Dust Cover | Terminal and mounting board are available. | 20 | 200 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 100 mA | 30 Ω | 300 mW | 150% V of rated coil voltage | Twin | Max. 30 mΩ (by voltage drop 6 V DC 1 A) | Stationary contact: Au flashed AgSnO2 type Movable contact: AgSnO2 type | 15 A 250 V AC, 10 A 30 V DC | 3,750 VA, 300 W | 250 V AC, 30 V DC (48 V DC: Max. 2 A) | 15 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,500 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | Max. 50 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 392 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -50 to +60°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 50 g | [switching frequency: at 20 times/min] Min. 100x103 ope. 15 A 250 V AC Min. 100x103 ope. 10 A 30 V DC | | | | |
| | 2 coil latching | Plug-in terminal | 5 V DC | 2 Form C | Dust Cover | Terminal and mounting board are available. | 20 | 200 | | | Set coil: 40 mA Reset coil: 40 mA | Set coil: 83 Ω Reset coil: 83 Ω | 300 mW | 150% V of rated coil voltage | Twin | Max. 30 mΩ (by voltage drop 6 V DC 1 A) | Stationary contact: Au flashed AgSnO2 type Movable contact: AgSnO2 type | 15 A 250 V AC, 10 A 30 V DC | 3,750 VA, 300 W | 250 V AC, 30 V DC (48 V DC: Max. 2 A) | 15 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,500 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | | | 392 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -50 to +60°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 50 g | [switching frequency: at 20 times/min] Min. 100x103 ope. 15 A 250 V AC Min. 100x103 ope. 10 A 30 V DC | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Max. 50 ms at rated coil voltage (without bounce) | Max. 50 ms at rated coil voltage (without bounce, without diode) |
| | Single side stable | Plug-in terminal | 48 V DC | 2 Form C | Dust Cover | Terminal and mounting board are available. | 20 | 200 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 6.2 mA | 7,700 Ω | 300 mW | 150% V of rated coil voltage | Twin | Max. 30 mΩ (by voltage drop 6 V DC 1 A) | Stationary contact: Au flashed AgSnO2 type Movable contact: AgSnO2 type | 15 A 250 V AC, 10 A 30 V DC | 3,750 VA, 300 W | 250 V AC, 30 V DC (48 V DC: Max. 2 A) | 15 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,500 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | Max. 50 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 392 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -50 to +60°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 50 g | [switching frequency: at 20 times/min] Min. 100x103 ope. 15 A 250 V AC Min. 100x103 ope. 10 A 30 V DC | | | | |
| | 2 coil latching | Plug-in terminal | 48 V DC | 2 Form C | Dust Cover | Terminal and mounting board are available. | 20 | 200 | | | Set coil: 6.2 mA Reset coil: 6.2 mA | Set coil: 7,680 Ω Reset coil: 7,680 Ω | 300 mW | 150% V of rated coil voltage | Twin | Max. 30 mΩ (by voltage drop 6 V DC 1 A) | Stationary contact: Au flashed AgSnO2 type Movable contact: AgSnO2 type | 15 A 250 V AC, 10 A 30 V DC | 3,750 VA, 300 W | 250 V AC, 30 V DC (48 V DC: Max. 2 A) | 15 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,500 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | | | 392 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -50 to +60°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 50 g | [switching frequency: at 20 times/min] Min. 100x103 ope. 15 A 250 V AC Min. 100x103 ope. 10 A 30 V DC | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Max. 50 ms at rated coil voltage (without bounce) | Max. 50 ms at rated coil voltage (without bounce, without diode) |
| | Single side stable | Plug-in terminal | 6 V DC | 4 Form C | Dust Cover | Terminal and mounting board are available. | 10 | 100 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 50 mA | 120 Ω | 300 mW | 150% V of rated coil voltage | Twin | Max. 30 mΩ (by voltage drop 6 V DC 1 A) | Stationary contact: Au flashed AgSnO2 type Movable contact: AgSnO2 type | 10 A 250 V AC, 10 A 30 V DC | 2,500 VA, 300 W | 250 V AC, 30 V DC (48 V DC: Max. 2 A) | 10 A | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,500 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | Max. 50 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 392 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -50 to +60°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 65 g | [switching frequency: at 20 times/min] Min. 100x103 ope. 10 A 250 V AC Min. 100x103 ope. 10 A 30 V DC | | | | |
| | Single side stable | Plug-in terminal | 3 V DC | 4 Form C | Dust Cover | Terminal and mounting board are available. | 10 | 100 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 100 mA | 30 Ω | 300 mW | 150% V of rated coil voltage | Twin | Max. 30 mΩ (by voltage drop 6 V DC 1 A) | Stationary contact: Au flashed AgSnO2 type Movable contact: AgSnO2 type | 10 A 250 V AC, 10 A 30 V DC | 2,500 VA, 300 W | 250 V AC, 30 V DC (48 V DC: Max. 2 A) | 10 A | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,500 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | Max. 50 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 392 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -50 to +60°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 65 g | [switching frequency: at 20 times/min] Min. 100x103 ope. 10 A 250 V AC Min. 100x103 ope. 10 A 30 V DC | | | | |
| | Single side stable | Plug-in terminal | 12 V DC | 2 Form C | Dust Cover | Terminal and mounting board are available. | 20 | 200 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 25 mA | 480 Ω | 300 mW | 150% V of rated coil voltage | Twin | Max. 30 mΩ (by voltage drop 6 V DC 1 A) | Stationary contact: Au flashed AgSnO2 type Movable contact: AgSnO2 type | 15 A 250 V AC, 10 A 30 V DC | 3,750 VA, 300 W | 250 V AC, 30 V DC (48 V DC: Max. 2 A) | 15 A (AC), 10 A (DC) | 100 mA 5 V DC | Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,500 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | 3,000 Vrms for 1 min (detection current: 10 mA) | Max. 50 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 392 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs) | 980 m/s2 (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x106 ope. (switching frequency: at 180 times/min) | Ambient temperature: -50 to +60°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 50 g | [switching frequency: at 20 times/min] Min. 100x103 ope. 15 A 250 V AC Min. 100x103 ope. 10 A 30 V DC | | | | |