Part Number List

Results 231
Models table for series TX Relays TH Type
Part No.DatasheetTerminal TypeOperating Function Rated Operating Power Coil VoltageSurface-Mount Terminal TypePacking QuantityProtective ConstructionContact TypeContact ArrangementContact MaterialPick-Up VoltageInput side: Drop-out VoltageNominal Switching Capacity (Resistive Load) Max. Switching CurrentMin. Switching Capacity Breakdown Voltage (Initial) : Between Open ContactsBreakdown Voltage (Initial) : Between Contact And CoilBreakdown Voltage (Contact-Contact) (Initial)Surge Breakdown Voltage (Initial): Between Open ContactsSurge Breakdown Voltage (Initial): Between Contacts and Coil Expected Life: MechanicalExpected Life: ElectricalConditionsHeight (mm)Weight (Typ.)Packing Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Max.switching current (*)
Standard PC board terminal
Single side stable type
140mW
9V DC
Tube packing
Sealed Type
Power type
2 Form C
Ag+Au plating
75%V or less of nominal voltage (Initial)
10%V or more of nominal voltage (Initial)
2A 30V DC, 0.5A 125V AC
7.5 A (Inrush)
10µA 10mV DC
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,500 V (10 x 160µs) (FCC Part 68)
2,500 V (2 x 10µs) (Telcordia)
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
5×105 (1 A 30 V DC resistive),
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Min. 2×105 [7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cosΦ= 0.4)] (ON/OFF = 1s/9s)
Ambient temperature: –40 to +85°C –40 to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
8.2
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A
When used at 7.5 A. Regarding connection method, you must follow the precaution,
Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Surface-mount terminal
Single side stable type
140mW
9V DC
SA type
Tape and reel packing (X)
Sealed Type
Power type
2 Form C
Ag+Au plating
75%V or less of nominal voltage (Initial)
10%V or more of nominal voltage (Initial)
2A 30V DC, 0.5A 125V AC
7.5 A (Inrush)
10µA 10mV DC
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,500 V (10 x 160µs) (FCC Part 68)
2,500 V (2 x 10µs) (Telcordia)
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
5×105 (1 A 30 V DC resistive),
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Min. 2×105 [7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cosΦ= 0.4)] (ON/OFF = 1s/9s)
Ambient temperature: –40 to +85°C –40 to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
8.4
Approx. 2 g .071 oz
500
1000
Inrush: 7.5 A, Steady: 2 A
When used at 7.5 A. Regarding connection method, you must follow the precaution,
Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Surface-mount terminal
Single side stable type
270mW
48V DC
SA type
Tape and reel packing (X)
Sealed Type
Power type
2 Form C
Ag+Au plating
75%V or less of nominal voltage (Initial)
10%V or more of nominal voltage (Initial)
2A 30V DC, 0.5A 125V AC
7.5 A (Inrush)
10µA 10mV DC
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,500 V (10 x 160µs) (FCC Part 68)
2,500 V (2 x 10µs) (Telcordia)
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
5×105 (1 A 30 V DC resistive),
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Min. 2×105 [7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cosΦ= 0.4)] (ON/OFF = 1s/9s)
Ambient temperature: –40 to +70°C –40 to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
8.4
Approx. 2 g .071 oz
500
1000
Inrush: 7.5 A, Steady: 2 A
When used at 7.5 A. Regarding connection method, you must follow the precaution,
Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Surface-mount terminal
Single side stable type
140mW
12V DC
SS type
Tape and reel packing (X)
Sealed Type
Power type
2 Form C
Ag+Au plating
75%V or less of nominal voltage (Initial)
10%V or more of nominal voltage (Initial)
2A 30V DC, 0.5A 125V AC
7.5 A (Inrush)
10µA 10mV DC
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,500 V (10 x 160µs) (FCC Part 68)
2,500 V (2 x 10µs) (Telcordia)
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
5×105 (1 A 30 V DC resistive),
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Min. 2×105 [7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cosΦ= 0.4)] (ON/OFF = 1s/9s)
Ambient temperature: –40 to +85°C –40 to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
8.4
Approx. 2 g .071 oz
500
1000
Inrush: 7.5 A, Steady: 2 A
When used at 7.5 A. Regarding connection method, you must follow the precaution,
Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Surface-mount terminal
Single side stable type
140mW
9V DC
SA type
Tape and reel packing (Z)
Sealed Type
Power type
2 Form C
Ag+Au plating
75%V or less of nominal voltage (Initial)
10%V or more of nominal voltage (Initial)
2A 30V DC, 0.5A 125V AC
7.5 A (Inrush)
10µA 10mV DC
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,500 V (10 x 160µs) (FCC Part 68)
2,500 V (2 x 10µs) (Telcordia)
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
5×105 (1 A 30 V DC resistive),
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Min. 2×105 [7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cosΦ= 0.4)] (ON/OFF = 1s/9s)
Ambient temperature: –40 to +85°C –40 to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
8.4
Approx. 2 g .071 oz
500
1000
Inrush: 7.5 A, Steady: 2 A
When used at 7.5 A. Regarding connection method, you must follow the precaution,
Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Surface-mount terminal
Single side stable type
140mW
1.5V DC
SA type
Tube packing
Sealed Type
Power type
2 Form C
Ag+Au plating
75%V or less of nominal voltage (Initial)
10%V or more of nominal voltage (Initial)
2A 30V DC, 0.5A 125V AC
7.5 A (Inrush)
10µA 10mV DC
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,500 V (10 x 160µs) (FCC Part 68)
2,500 V (2 x 10µs) (Telcordia)
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
5×105 (1 A 30 V DC resistive),
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Min. 2×105 [7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cosΦ= 0.4)] (ON/OFF = 1s/9s)
Ambient temperature: –40 to +85°C –40 to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
8.4
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A
When used at 7.5 A. Regarding connection method, you must follow the precaution,
Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Surface-mount terminal
Single side stable type
270mW
48V DC
SA type
Tube packing
Sealed Type
Power type
2 Form C
Ag+Au plating
75%V or less of nominal voltage (Initial)
10%V or more of nominal voltage (Initial)
2A 30V DC, 0.5A 125V AC
7.5 A (Inrush)
10µA 10mV DC
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,500 V (10 x 160µs) (FCC Part 68)
2,500 V (2 x 10µs) (Telcordia)
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
5×105 (1 A 30 V DC resistive),
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Min. 2×105 [7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cosΦ= 0.4)] (ON/OFF = 1s/9s)
Ambient temperature: –40 to +70°C –40 to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
8.4
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A
When used at 7.5 A. Regarding connection method, you must follow the precaution,
Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Surface-mount terminal
Single side stable type
140mW
1.5V DC
SS type
Tube packing
Sealed Type
Power type
2 Form C
Ag+Au plating
75%V or less of nominal voltage (Initial)
10%V or more of nominal voltage (Initial)
2A 30V DC, 0.5A 125V AC
7.5 A (Inrush)
10µA 10mV DC
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,500 V (10 x 160µs) (FCC Part 68)
2,500 V (2 x 10µs) (Telcordia)
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
5×105 (1 A 30 V DC resistive),
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Min. 2×105 [7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cosΦ= 0.4)] (ON/OFF = 1s/9s)
Ambient temperature: –40 to +85°C –40 to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
8.4
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A
When used at 7.5 A. Regarding connection method, you must follow the precaution,
Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Surface-mount terminal
Single side stable type
140mW
12V DC
SS type
Tube packing
Sealed Type
Power type
2 Form C
Ag+Au plating
75%V or less of nominal voltage (Initial)
10%V or more of nominal voltage (Initial)
2A 30V DC, 0.5A 125V AC
7.5 A (Inrush)
10µA 10mV DC
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,500 V (10 x 160µs) (FCC Part 68)
2,500 V (2 x 10µs) (Telcordia)
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
5×105 (1 A 30 V DC resistive),
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Min. 2×105 [7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cosΦ= 0.4)] (ON/OFF = 1s/9s)
Ambient temperature: –40 to +85°C –40 to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
8.4
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A
When used at 7.5 A. Regarding connection method, you must follow the precaution,
Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Surface-mount terminal
Single side stable type
140mW
5V DC
SA type
Tube packing
Sealed Type
Power type
2 Form C
Ag+Au plating
75%V or less of nominal voltage (Initial)
10%V or more of nominal voltage (Initial)
2A 30V DC, 0.5A 125V AC
7.5 A (Inrush)
10µA 10mV DC
1,000 Vrms for 1min. (Detection current: 10mA.)
2,000 Vrms for 1min. (Detection current: 10mA.)
1,000 Vrms for 1min. (Detection current: 10mA.)
1,500 V (10 x 160µs) (FCC Part 68)
2,500 V (2 x 10µs) (Telcordia)
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
5×105 (1 A 30 V DC resistive),
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
Min. 2×105 [7.5 A inrush (250 ms)/1.5 A normal 30 V AC (cosΦ= 0.4)] (ON/OFF = 1s/9s)
Ambient temperature: –40 to +85°C –40 to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
8.4
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A
When used at 7.5 A. Regarding connection method, you must follow the precaution,
Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.

What's New

Stay up to date