Panasonic TX-TH Series Signal Relays provide different signal switching circuits by using twin crossbar contacts which ensure high switching reliability. The contacts also come standard with gold plating to reduce the potential of oxidation and silver-palladium (AgPd) for use in low-level load analog circuits. Available as a 2FormC contact arrangement, this Series offers single side stable as well as either single or double coil latching drive types. The TX-TH Series Signal Relays also features surface mount or through-hole terminals and coil voltages which range from 1.5 up to 48V DC.
The TX-TH Series Signal Relays are also capable of handling inrush currents up to 7.5A typically required by such applications as thermostats.
Features and Benefits
2 Types of Terminal Shapes: PC Board Terminal And Surface Mount Terminal
7.5A Inrush Current Possible
Compliant With Telcordia Standard: Surge Withstand Voltage 2,500 V Between Contact And Coil
Confort to FCC Part68: Surge Withstand Voltage 1,500 V Between Open Contacts
Dielectric Strength: 2,000 Vrms Between Contact And Coil
Applications
Air Conditioning Control - Solenoid
Other High Capacity Control
Promoted Resources
TX Series Relays TH Type
Part number list
Results 231
Models table for series TX Series Relays TH Type
Part No.
Datasheet
Engineering Drawings
Terminal Type
Operating Function
Rated Operating Power
Coil Voltage
Surface-Mount Terminal Type
Packing Quantity
Protective Construction
Contact Type
Contact Arrangement
Contact Material
Pick-Up Voltage
Input side: Drop-out Voltage
Nominal Switching Capacity (Resistive Load)
Max. Switching Current
Min. Switching Capacity
Breakdown Voltage (Initial) : Between Open Contacts
Breakdown Voltage (Initial) : Between Contact And Coil
Breakdown Voltage (Contact-Contact) (Initial)
Surge Breakdown Voltage (Initial): Between Open Contacts
Surge Breakdown Voltage (Initial): Between Contacts and Coil
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
500
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
500
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.2
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.2
Approx. 2 g .071 oz
40
1000
75%V or less of nominal voltage (Initial)
75%V or less of nominal voltage (Initial)
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
500
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
40
1000
75%V or less of nominal voltage (Initial)
75%V or less of nominal voltage (Initial)
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.2
Approx. 2 g .071 oz
40
1000
75%V or less of nominal voltage (Initial)
75%V or less of nominal voltage (Initial)
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.2
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Models table for series TX Series Relays TH Type
Part No.
Datasheet
Engineering Drawings
Terminal Type
Operating Function
Rated Operating Power
Coil Voltage
Surface-Mount Terminal Type
Packing Quantity
Protective Construction
Contact Type
Contact Arrangement
Contact Material
Pick-Up Voltage
Input side: Drop-out Voltage
Nominal Switching Capacity (Resistive Load)
Max. Switching Current
Min. Switching Capacity
Breakdown Voltage (Initial) : Between Open Contacts
Breakdown Voltage (Initial) : Between Contact And Coil
Breakdown Voltage (Contact-Contact) (Initial)
Surge Breakdown Voltage (Initial): Between Open Contacts
Surge Breakdown Voltage (Initial): Between Contacts and Coil
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
500
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
500
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.2
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.2
Approx. 2 g .071 oz
40
1000
75%V or less of nominal voltage (Initial)
75%V or less of nominal voltage (Initial)
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
500
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
40
1000
75%V or less of nominal voltage (Initial)
75%V or less of nominal voltage (Initial)
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.2
Approx. 2 g .071 oz
40
1000
75%V or less of nominal voltage (Initial)
75%V or less of nominal voltage (Initial)
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.2
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
Min. 100 x 106ope. (Switching frequency: at 180 times/min)
Please contact our sales representative.
Ambient temperature: –40 to +85℃ (Allowable temperature is from －40 to ＋70 ℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)
8.4
Approx. 2 g .071 oz
40
1000
Inrush: 7.5 A, Steady: 2 A When used at 7.5 A. Regarding connection method, you must follow the precaution, Connection of No (pin #5 and #8) and COM (pin #4 and #9) in the cricuit is required.
