Panasonic’s Bluetooth® 5.3 Low Energy RF Module Based On The Nordic nRF52840 Single-Chip Controller - Available with APPROTECT

The PAN1780 Series RF Module is Panasonic’s Bluetooth 5.3 Low Energy RF Module based on the Nordic nRF52840 single-chip controller.

Panasonic's PAN1780 Series Bluetooth 5.3 features enable a higher symbol rate of 2 Mbps using the high-speed LE 2M PHY or a significantly longer range using the LE coded PHY at 500 kb/s or 125 kb/s. The PAN1780 Series offers core Bluetooth Low Energy 5.3 functionality as well as long range and high speed modes. By way of a change in the Nordic Soft Device the PAN1780 Series can also operate as a Bluetooth Low Energy Mesh 1.0 flood mesh device or an 802.15.4 Zigbee or Thread directed-mesh node. In addition 1kB of NFC-A tag memory is available.

The new channel selection algorithm (CSA#2) improves the performance in high interference environments. Furthermore, the new LE advertising extensions allow for much larger amounts of data to be broadcasted in connectionless scenarios.

An output power of up to 8 dBm and the high sensitivity of the Nordic nRF52840 in combination with the LE coded PHY make the PAN1780 Series RF Module very attractive in applications where a long range is required.

In addition, the ultra-low current consumption of the PAN1780 Series makes this RF Module an ideal choice for Battery powered devices.

With the Cortex™ M4F processor, 256 kB RAM and the build-in 1 MB flash memory the PAN1780 Series can easily be used in standalone mode, thereby eliminating the need for an external processor, saving complexity, space and cost. The rich set of security features from the ARM® TrustZone® CryptoCell® 310 security subsystem provide the necessary means for secure device operation in the IoT space.

The PAN1780 Series also supports Type 2 Near Field Communication (NFC-A) for use in simplified pairing and payment solutions (external antenna required).

FCC, IC, and CE approval are in preparation.

PAN1780 Series Evaluation Kit

The PAN1780 Series Evaluation Kit is an all-inclusive and comprehensive Evaluation Kit consisting of two USB dongles and two external NFC antennas. Each dongle allows design engineers to develop, run and debug code with the PAN1780 Series Module.

The break-out headers provide an easy way to connect Sensors, as well as other devices for rapid prototyping.

The USB Evaluation Boards are delivered without any preinstalled software examples, but an integration guide is available explaining how to use the recommended development environment and the free Nordic Semiconductors Software Development Kit, to run different kinds of Bluetooth, thread, ZigBee, 802.15.4 and Antennae software examples.

PAN1780 Block Diagram

pan1780 block diagram

General Features and Benefits

  • Surface Mount Type Dimensions: 15.6 mm x 8.7 mm x 2 mm
  • Same Form Factor as PAN1026A and PAN1762 But Smaller Pitch And More Pins
  • Nordic nRF52840 Featuring ARM® Cortex®-M4F With 64 MHz
  • Bluetooth® 5.3 Low Energy Including LE 2M And LE Coded PHY
  • Embedded 1 MB Flash Memory And 256 kB Internal RAM
  • Includes ARM® TrustZone® CryptoCell® 310 And Supports Secure Boot Including Root-of-Trust (RoT)
  • Up to 48 general purpose I/Os (GPIO), which are shared by up to 4 SPI, 2 I²C, 2 UART, 4 PWM, 8 ADC, 1 NFC-A, 32 kHz IN/OUT, nRESET
  • USB 2.0 Full-Speed Device Interface
  • Built-in Temperature Sensor
  • Available with APPROTECT
Series image for PAN1780 Series

PAN1780 Series

Part number list

Results 2
Models table for series PAN1780 Series
Part No.DatasheetSizeUsed ICsRx Sensitivity (dBm)Programmable Tx Power (Max.) Operating Temp.Current Consum.Frequency RangeData Rate (Max. Air)
15.6mm x 8.7mm x 2mm
nRF52840
-95 @ 1Mb/s and -103 @ 125Kb/s
8dBm configurable from -20dBm in 4dB steps
-40 to +85 °C
4.8mA @ 0dBm, 4.8mA in Rx mode (Tx,Rx)
2.4 GHz
1Mb/s (gross)
15.6mm x 8.7mm x 2mm
nRF52840
-95 @ 1Mb/s and -103 @ 125Kb/s
8dBm configurable from -20dBm in 4dB steps
-40 to +85 °C
4.8mA @ 0dBm, 4.8mA in Rx mode (Tx,Rx)
2.4 GHz
1Mb/s (gross)

Learn About the PAN1780 Wirepass Mesh Demo Kit

pan1780 wirepas
Ready-to-use Evaluation Tool based on the PAN1780 in combination with the Wirepas Mesh connectivity stack

Panasonic partnered with the IoT software consulting firm Symbiotech to produce a Demo Kit intended for IoT enthusiasts and professionals seeking high-performance, ready-to-use Wirepas Sensor Nodes to set up a Wirepas Mesh network at any time and at any place in just a few steps. Featuring the Bluetooth® 5.3 Low Energy RF Module provides a sensor node with a long wireless transmission range, achieved by the optimized chip antenna.

PAN1780 Series Wirepas Mesh Demo Kits are available in one part number: ENW89854ATKF

PAN1780 Evaluation Kit

PAN1780 Series Evaluation Kit
Panasonic's Evaluation Kit For The PAN1780 Bluetooth 5.3 Low Energy RF Module

The PAN1780 Evaluation Kit is an all-inclusive and comprehensive Evaluation Kit consisting of two USB dongles and two external NFC antennas.  Each dongle allows design engineers to develop, run and debug code with the PAN1780 Series RF Module.

The break-out headers provide an easy way to connect Sensors, as well as other devices for a rapid prototyping.

The USB Evaluation Boards are delivered without any preinstalled software examples, but an integration guide is available explaining how to use the recommended development environment and the free Nordic Semiconductors Software Development Kit, to run different kinds of Bluetooth, thread, ZigBee, 802.15.4 and Antennae software examples.

The PAN1780 Evaluation Kit is available from all franchised Panasonic Industrial channel partners.

Latest Videos

Playlist

Thumbnail for Quick Clips: PAN4620 Series Mesh Networking RF Module

Quick Clips: PAN4620 Series Mesh Networking RF Module

Thumbnail for How to set-up the PAN1780 Wirepas Mesh Demo Kit

How to set-up the PAN1780 Wirepas Mesh Demo Kit