Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH

Simple automatic sensitivity setting, compact design and quick wire connection makes the NX5 an optimal sensor for most applications.

Models table for series Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH
Part No.	Datasheet	Applicable Amplifiers	Sensing Range	Sensing Object	Hysteresis	Repeatability (Perpendicular to Sensing Axis)	Applicable Sensor Head	Supply Voltage	Current Consumption	Sensing Output	Sensing Output: Output Operation	Sensing Output: Short-Circuit Protection	Self-Diagnosis Output	Self-Diagnosis Output: Output Operation	Self-Diagnosis Output: Short-Circuit Protection	Response Time	Operation Indicator	Stability Indicator	Test Input (Emission Halt) Function	External Synchronization Function	Remote Sensitivity Setting Function	Remote Sensitivity Selection Function	Sensitivity Shift & Limit Sensitivity Setting Functions	Automatic Interference Prevention Function	Timer Function	Protection	Ambient Temperature	Ambient Humidity	Ambient Illuminance	Voltage Withstandability	Insulation Resistance	Vibration Resistance	Shock Resistance	Emitting Element	Emitting Element: Peak Emission Wavelength	Material	Cable	Cable Extension	Weight (Typ.)	Accessory	Remark
SU-77							SH series	12 to 24 V DC ± 10 % Ripple P-P 10 % or less	35 mA or less	NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and 0 V) ・Residual voltage: 1.0 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)	Selectable either Light-ON or Dark-ON with the ON and OFF buttons (Selectable with the external inputs for SU-77)	Incorporated	NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) ・Residual voltage: 1.0 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current)	ON under unstable sensing condition (restored automatically after 40 ms approx.), or if the sensing output is short-circuited (restored when short-circuit is rectified). (For the remote sensitivity adjustment type, it turns ON for 40 ms approx. Also after the remote sensitivity input is received.)	-	0.6 ms or less (0.8 ms or less when the interference prevention function is used)	Red LED (lights up when the sensing output is ON)	Green LED ("RUN" mode: Lights up under stable light received condition or stable dark condition "SET" mode: At the time of sensitivity setting, blinks twice when the difference between ON and OFF levels is greater than the hysteresis, but blinks 15 times when it is equal to or less than the hysteresis. Also blinks twice after the interference prevention is set "SET" mode → When "SIF" or "RUN" mode is selected: Blinks from 0 to 5 times according to the sensitivity margin)	-	-	Incorporated	-	Shifts the set sensitivity level	Incorporated	ON-delay / OFF-delay timer (variable 0 to 5 sec.)		-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH		1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each			Enclosure: Heat-resistant ABS, Case cover: Polycarbonate, Cable lock lever: PPS	0.15 mm² 6-core cabtyre cable, 2 m 6.562 ft long	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.	Net weight: 65 g approx.	MS-DIN-2 (Amplifier mounting bracket): 1 pc., SU-CT1 (Stripper): 1 pc.	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-82R		SU-7 series	10 to 14 mm 0.394 to 0.551 in (Convergent point: 12 mm 0.472 in) (Spot diameter: ø0.7 mm ø0.028 in) Note : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.	Min. 0.07 mm 0.003 in width black line on white paper (with 12 mm 0.472 in setting distance and at the optimum sensitivity) Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.	10 % or less of operation distance Note 2 : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.	0.02 mm 0.0008 in or less											Red LED (lights up when the sensing output of the amplifier is ON)									-	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red LED (modulated)	680 nm 0.027 mil	Enclosure: Polycarbonate, Lens: Acrylic	0.089 mm² single core, two parallel shielded cables, 2 m 6.562 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable.	20 g approx.	-	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-72		SU-7 series	0.5 to 7.5 mm 0.020 to 0.295 in (with transparent glass plate)	□24 mm □0.945 in or more transparent glass, aluminum-evaporated mirror, etc. Note : Make sure to confirm detection with an actual sensor before use.	5 % or less of operation distance	0.03 mm 0.001 in or less (along sensing axis)											-									-	-10 to +60 ℃ +14 to +140 ℉(No dew condensation or icing allowed) Storage: -10 to +60 ℃ +14 to +140 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (modulated)	880 nm 0.035 mil	Enclosure: Polycarbonate	0.089 mm² single core, two parallel shielded cables, 3 m 9.843 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable.	25 g approx.	-	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-82G		SU-7 series	10 to 14 mm 0.394 to 0.551 in (Convergent point: 12 mm 0.472 in) (Spot diameter: ø1 mm ø0.039 in) Note : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.	Min. 0.2 mm 0.008 in width black line on white paper (with 12 mm 0.472 in setting distance and at the optimum sensitivity) Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.	10 % or less of operation distance Note 2 : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.	0.03 mm 0.001 in or less											Red LED (lights up when the sensing output of the amplifier is ON)									-	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Green LED(modulated)	570 nm 0.022 mil	Enclosure: Polycarbonate, Lens: Acrylic	0.089 mm² single core, two parallel shielded cables, 2 m 6.562 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable.	20 g approx.	-	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-31R
SH-31G		SU-7 series	100 mm 3.937 in	Min. ø1 mm ø0.039 in opaque object (with 100 mm 3.937 in setting distance and at the optimum sensitivity) Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.	-	0.1 mm 0.004 in or less											Red LED(lights up when the sensing output of the amplifier is ON, incorporated on the emitter of the thru-beam type sensor head)									IP66 (IEC)	-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed) Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Green LED(modulated)	570 nm 0.022 mil	Enclosure: ABS, Lens: Polycarbonate	0.089 mm² single core shielded cable, 3 m 9.843 ft long	Extension up to total 10 m 32.808 ft is possible with an equivalent cable (thru-beam type: both emitter and receiver).	Emitter: 10 g approx. Receiver: 10 g approx.	-	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-21E		SU-7 series	300 mm 11.811 in	Min. ø0.3 mm ø0.012 in opaque object (under the optimum condition) Note : The optimum condition is the condition when the sensitivity is adjusted so that the operation indicator just lights up at the given distance in the light received condition.	-	0.03 mm 0.001 in or less											-									IP62 (IEC)	-10 to +60 ℃ +14 to 140 ℉ (No dew condensation or icing allowed) Storage : -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (modulated)	880 nm 0.035 mil	Enclosure: Polycarbonate (glass fiber reinforced)	0.057 mm² single core shielded cable, 3 m 9.843 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable (thru-beam type: both emitter and receiver).	Emitter: 12 g approx. Receiver: 12 g approx.	Sensor head mounting screw: 2 sets	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-61R		SU-7 series	2.5 m 8.202 ft [5 to 80 mm 0.197 to 3.150 in when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type (Conv. point: 25 mm 0.984 in) (Note)] Note : The sensing range and the hysteresis for the chemical resistant type sensor used in the convergent reflective mode is specified for white non-glossy paper (150 x 150 mm 5.906 x 5.906 in) as the object.	Min. ø5 mm ø0.197 in opaque object [Min. ø1 mm ø0.039 in steel wire when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type (with 25 mm 0.984 in setting distance and at the max. sensitivity)]	- [15 % or less of operation distance when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type.(Note)] Note : The sensing range and the hysteresis for the chemical resistant type sensor used in the convergent reflective mode is specified for white non-glossy paper (150 x 150 mm 5.906 x 5.906 in) as the object.	0.1 mm 0.004 in or less [0.1 mm 0.004 in or less of operation distance when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type. (with 25 mm 0.984 in setting distance and at the optimum sensitivity(Note))] Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.											Orange LED [lights up when the sensing output of the amplifier is ON, incorporated on the emitter]									IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 2,000 lx or less at the light-receiving face			10 to 55 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red LED (modulated)	644 nm 0.025 mil	Enclosure: Fluorine resin Cable sheath: Fluorine resin	0.089 mm² single core shielded cables, 2 m 6.562 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable (SH-61R: both emitter and receiver).	Emitter: 15 g approx. Receiver: 15 g approx.	MS-SH6-1 (Sensor head mounting bracket): 2 pcs.	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-22		SU-7 series	50 mm 1.969 in(Note) Note 2 : The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) as the object.	Min. ø0.3 mm ø0.012 in copper wire (with 3 mm 0.118 in setting distance and at the max sensitivity)	15 % or less of operation distance Note : The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) as the object.	0.15 mm 0.006 in or less											-									IP62 (IEC)	-10 to +60 ℃ +14 to 140 ℉ (No dew condensation or icing allowed) Storage : -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (modulated)	880 nm 0.035 mil	Enclosure: Polycarbonate (glass fiber reinforced)	0.057 mm² two parallel single core wires shielded cable, 3 m 9.843 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable.	24 g approx.	Sensor head mounting screw: 1 sets	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-21		SU-7 series	300 mm 11.811 in	Min. ø0.3 mm ø0.012 in opaque object (under the optimum condition) Note : The optimum condition is the condition when the sensitivity is adjusted so that the operation indicator just lights up at the given distance in the light received condition.	-	0.03 mm 0.001 in or less											-									IP62 (IEC)	-10 to +60 ℃ +14 to 140 ℉ (No dew condensation or icing allowed) Storage : -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (modulated)	880 nm 0.035 mil	Enclosure: Polycarbonate (glass fiber reinforced)	0.057 mm² single core shielded cable, 3 m 9.843 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable (thru-beam type: both emitter and receiver).	Emitter: 12 g approx. Receiver: 12 g approx.	Sensor head mounting screw: 2 sets	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

Models table for series Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH
Part No.	Datasheet	Applicable Amplifiers	Sensing Range	Sensing Object	Hysteresis	Repeatability (Perpendicular to Sensing Axis)	Applicable Sensor Head	Supply Voltage	Current Consumption	Sensing Output	Sensing Output: Output Operation	Sensing Output: Short-Circuit Protection	Self-Diagnosis Output	Self-Diagnosis Output: Output Operation	Self-Diagnosis Output: Short-Circuit Protection	Response Time	Operation Indicator	Stability Indicator	Test Input (Emission Halt) Function	External Synchronization Function	Remote Sensitivity Setting Function	Remote Sensitivity Selection Function	Sensitivity Shift & Limit Sensitivity Setting Functions	Automatic Interference Prevention Function	Timer Function	Protection	Ambient Temperature	Ambient Humidity	Ambient Illuminance	Voltage Withstandability	Insulation Resistance	Vibration Resistance	Shock Resistance	Emitting Element	Emitting Element: Peak Emission Wavelength	Material	Cable	Cable Extension	Weight (Typ.)	Accessory	Remark
SU-77							SH series	12 to 24 V DC ± 10 % Ripple P-P 10 % or less	35 mA or less	NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and 0 V) ・Residual voltage: 1.0 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)	Selectable either Light-ON or Dark-ON with the ON and OFF buttons (Selectable with the external inputs for SU-77)	Incorporated	NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) ・Residual voltage: 1.0 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current)	ON under unstable sensing condition (restored automatically after 40 ms approx.), or if the sensing output is short-circuited (restored when short-circuit is rectified). (For the remote sensitivity adjustment type, it turns ON for 40 ms approx. Also after the remote sensitivity input is received.)	-	0.6 ms or less (0.8 ms or less when the interference prevention function is used)	Red LED (lights up when the sensing output is ON)	Green LED ("RUN" mode: Lights up under stable light received condition or stable dark condition "SET" mode: At the time of sensitivity setting, blinks twice when the difference between ON and OFF levels is greater than the hysteresis, but blinks 15 times when it is equal to or less than the hysteresis. Also blinks twice after the interference prevention is set "SET" mode → When "SIF" or "RUN" mode is selected: Blinks from 0 to 5 times according to the sensitivity margin)	-	-	Incorporated	-	Shifts the set sensitivity level	Incorporated	ON-delay / OFF-delay timer (variable 0 to 5 sec.)		-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH		1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each			Enclosure: Heat-resistant ABS, Case cover: Polycarbonate, Cable lock lever: PPS	0.15 mm² 6-core cabtyre cable, 2 m 6.562 ft long	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.	Net weight: 65 g approx.	MS-DIN-2 (Amplifier mounting bracket): 1 pc., SU-CT1 (Stripper): 1 pc.	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-82R		SU-7 series	10 to 14 mm 0.394 to 0.551 in (Convergent point: 12 mm 0.472 in) (Spot diameter: ø0.7 mm ø0.028 in) Note : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.	Min. 0.07 mm 0.003 in width black line on white paper (with 12 mm 0.472 in setting distance and at the optimum sensitivity) Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.	10 % or less of operation distance Note 2 : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.	0.02 mm 0.0008 in or less											Red LED (lights up when the sensing output of the amplifier is ON)									-	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red LED (modulated)	680 nm 0.027 mil	Enclosure: Polycarbonate, Lens: Acrylic	0.089 mm² single core, two parallel shielded cables, 2 m 6.562 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable.	20 g approx.	-	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-72		SU-7 series	0.5 to 7.5 mm 0.020 to 0.295 in (with transparent glass plate)	□24 mm □0.945 in or more transparent glass, aluminum-evaporated mirror, etc. Note : Make sure to confirm detection with an actual sensor before use.	5 % or less of operation distance	0.03 mm 0.001 in or less (along sensing axis)											-									-	-10 to +60 ℃ +14 to +140 ℉(No dew condensation or icing allowed) Storage: -10 to +60 ℃ +14 to +140 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (modulated)	880 nm 0.035 mil	Enclosure: Polycarbonate	0.089 mm² single core, two parallel shielded cables, 3 m 9.843 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable.	25 g approx.	-	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-82G		SU-7 series	10 to 14 mm 0.394 to 0.551 in (Convergent point: 12 mm 0.472 in) (Spot diameter: ø1 mm ø0.039 in) Note : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.	Min. 0.2 mm 0.008 in width black line on white paper (with 12 mm 0.472 in setting distance and at the optimum sensitivity) Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.	10 % or less of operation distance Note 2 : The sensing range and the hysteresis of the mark sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in separatedin) as the object.	0.03 mm 0.001 in or less											Red LED (lights up when the sensing output of the amplifier is ON)									-	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Green LED(modulated)	570 nm 0.022 mil	Enclosure: Polycarbonate, Lens: Acrylic	0.089 mm² single core, two parallel shielded cables, 2 m 6.562 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable.	20 g approx.	-	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-31R
SH-31G		SU-7 series	100 mm 3.937 in	Min. ø1 mm ø0.039 in opaque object (with 100 mm 3.937 in setting distance and at the optimum sensitivity) Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.	-	0.1 mm 0.004 in or less											Red LED(lights up when the sensing output of the amplifier is ON, incorporated on the emitter of the thru-beam type sensor head)									IP66 (IEC)	-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed) Storage: -30 to +70 ℃ -22 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Green LED(modulated)	570 nm 0.022 mil	Enclosure: ABS, Lens: Polycarbonate	0.089 mm² single core shielded cable, 3 m 9.843 ft long	Extension up to total 10 m 32.808 ft is possible with an equivalent cable (thru-beam type: both emitter and receiver).	Emitter: 10 g approx. Receiver: 10 g approx.	-	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-21E		SU-7 series	300 mm 11.811 in	Min. ø0.3 mm ø0.012 in opaque object (under the optimum condition) Note : The optimum condition is the condition when the sensitivity is adjusted so that the operation indicator just lights up at the given distance in the light received condition.	-	0.03 mm 0.001 in or less											-									IP62 (IEC)	-10 to +60 ℃ +14 to 140 ℉ (No dew condensation or icing allowed) Storage : -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (modulated)	880 nm 0.035 mil	Enclosure: Polycarbonate (glass fiber reinforced)	0.057 mm² single core shielded cable, 3 m 9.843 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable (thru-beam type: both emitter and receiver).	Emitter: 12 g approx. Receiver: 12 g approx.	Sensor head mounting screw: 2 sets	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-61R		SU-7 series	2.5 m 8.202 ft [5 to 80 mm 0.197 to 3.150 in when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type (Conv. point: 25 mm 0.984 in) (Note)] Note : The sensing range and the hysteresis for the chemical resistant type sensor used in the convergent reflective mode is specified for white non-glossy paper (150 x 150 mm 5.906 x 5.906 in) as the object.	Min. ø5 mm ø0.197 in opaque object [Min. ø1 mm ø0.039 in steel wire when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type (with 25 mm 0.984 in setting distance and at the max. sensitivity)]	- [15 % or less of operation distance when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type.(Note)] Note : The sensing range and the hysteresis for the chemical resistant type sensor used in the convergent reflective mode is specified for white non-glossy paper (150 x 150 mm 5.906 x 5.906 in) as the object.	0.1 mm 0.004 in or less [0.1 mm 0.004 in or less of operation distance when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type. (with 25 mm 0.984 in setting distance and at the optimum sensitivity(Note))] Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.											Orange LED [lights up when the sensing output of the amplifier is ON, incorporated on the emitter]									IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 2,000 lx or less at the light-receiving face			10 to 55 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Red LED (modulated)	644 nm 0.025 mil	Enclosure: Fluorine resin Cable sheath: Fluorine resin	0.089 mm² single core shielded cables, 2 m 6.562 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable (SH-61R: both emitter and receiver).	Emitter: 15 g approx. Receiver: 15 g approx.	MS-SH6-1 (Sensor head mounting bracket): 2 pcs.	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-22		SU-7 series	50 mm 1.969 in(Note) Note 2 : The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) as the object.	Min. ø0.3 mm ø0.012 in copper wire (with 3 mm 0.118 in setting distance and at the max sensitivity)	15 % or less of operation distance Note : The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (50 x 50 mm 1.969 x 1.969 in) as the object.	0.15 mm 0.006 in or less											-									IP62 (IEC)	-10 to +60 ℃ +14 to 140 ℉ (No dew condensation or icing allowed) Storage : -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (modulated)	880 nm 0.035 mil	Enclosure: Polycarbonate (glass fiber reinforced)	0.057 mm² two parallel single core wires shielded cable, 3 m 9.843 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable.	24 g approx.	Sensor head mounting screw: 1 sets	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
SH-21		SU-7 series	300 mm 11.811 in	Min. ø0.3 mm ø0.012 in opaque object (under the optimum condition) Note : The optimum condition is the condition when the sensitivity is adjusted so that the operation indicator just lights up at the given distance in the light received condition.	-	0.03 mm 0.001 in or less											-									IP62 (IEC)	-10 to +60 ℃ +14 to 140 ℉ (No dew condensation or icing allowed) Storage : -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face			10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (modulated)	880 nm 0.035 mil	Enclosure: Polycarbonate (glass fiber reinforced)	0.057 mm² single core shielded cable, 3 m 9.843 ft long	Extension up to total 5 m 16.404 ft is possible with an equivalent cable (thru-beam type: both emitter and receiver).	Emitter: 12 g approx. Receiver: 12 g approx.	Sensor head mounting screw: 2 sets	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.