Count on Panasonic to provide the latest advancements in innovative solutions especially important in the medical field for critical applications. Panasonic Sensors contribute to energy savings, safety, comfort security, awareness, and much more. With high-functionality and high-performance, Panasonic has solutions for sensing and detecting rotational speed and angle, position, flow, velocity, temperature, magnetism, currents, and many more medical application requirements!
Felios Adhesiveless Flex Circuit Board Materials are available in a variety of film and copper foil thicknesses to support many applications. The Flexible Circuit Board laminates offer superior thermal resistance, dimensional stability, and quality. All are suitable for a wide range of end-use products such as mobile devices as well as medical, industrial and more.
These lightweight, thin Amorphous Silicon Solar Cells are designed for both indoor and outdoor applications. Unlike crystalline types, these cells allow more light to be absorbed. The cells can power a variety of indoor devices and are available in traditional glass, advanced stainless steel, and film substrate. These substrates are lightweight and provide greater flexibility for demanding uses.
This 8x8 Infrared Array Sensor is used in applications that include human detection, people counting, thermal mapping, digital signage, security, lighting control, medical imaging, automatic doors, robotics, and much more. The Grid-EYE Sensor is capable of detecting temperature distributions without contact.
Panasonic’s 6in1 Inertial Sensor is designed for highly accurate motion detection that offers 6DoF (Degrees of Freedom). It provides highly sensitive and accurate linear acceleration with 3 Accelerometers and angular position detection with 3 Gyroscopes, all in one single MEMS chip with a package size of 4.5mm x 4.5mm x 1.1mm! This enables the 6in1 Intertial Sensor to be compact, highly accurate, and easy-to-install.
This Laser Type Particulate Matter Sensor is comprised of an on-board microprocessor, micro-fan, and laser diode. It has been programmed so the fan will operate based on the amount of particle dust (2.5 microns) surrounding the laser diode. This Sensor is suitable for a wide variety of indoor air quality applications.
Panasonic technologies offer highly advanced products ideally suited for the health and wellness industry for critical care applications. Where complex medical device requirements are needed, Panasonic can help support your design needs. Request Medical Device Design In Assistance!
Panasonic's Lithium-Ion Batteries offer high energy density, safe operation, and long-life. These high-energy-density Batteries are widely used in the portable equipment market. A high voltage of 3.6V allows for less number of Batteries required.
Panasonic Rechargeable NiMH Batteries offer longer run time and are designed for high-rate applications and offer up to three times the capacity of the same size standard Nickel Cadmium Batteries. Due to their increased capacity and energy density features, users can expect a longer run time between charges.
The GB-L1CM1 Ultrasonic Gas Sensor acts as two sensors in one, simultaneously measuring gas flow and concentration. It also has a very small footprint and runs off a 3V power supply and measures known gases such as Oxygen, Nitrogen, Hydrogen, Nitrous Oxide, Carbon Dioxide, Argon, and Helium.
Panasonic’s ESD Suppressors have excellent electrostatic-noise suppression and ESD withstanding characteristics. They are available in small sizes, are lightweight, have low capacitance loading and high peak voltage handling capabilities. The EZA-EG2A50AX part is recommended for medical applications.
Panasonic's Tactile Switches offer high-quality and versatility that can be used in almost any user interface application. Featuring on-state push operation, operational signal input, flexible design, long life, excellent environmental resistance, and more.
Panasonic's PGS or Pyrolytic Graphite Sheet and SSM or Semi-Sealing Material protects electronic devices from heat through quick thermal diffusion with its excellent thermal conductivity. These Thermal Management products are lightweight and flexible, are easy to customize, offer low thermal resistance, and are RoHS Compliant.
Indoor air quality or IAQ is the air quality within and around the facility affected by gases that include carbon monoxide, radon, volatile organic compounds, and other particulates.
Panasonic offers products suitable for Indoor Air Quality applications, such as:
From the OR to the ER, and the nurse’s station to the waiting room, Panasonic electronic products power the devices that keep us safe and healthy. The medical device industry depends on Panasonic for reliable, high-quality products that power solutions ranging from large equipment to small, wearable devices.
Overall Hospital View
Discover the Panasonic products powering the wide variety of devices that keeps medical facilities running and patients healthy. View all of the areas of a hospital room by room to view all medical application examples and Panasonic products that power them.
Get the latest Panasonic product and technology updates delivered once a month. With over 135,000 available part numbers and the technical expertise to create new solutions, Panasonic Industrial invests in partnerships with customers to build a Better Life, A Better World one component, one device, one system at a time! Join the Panasonic Community and sign up for the What's Next monthly eNewsletter!