EV Series Relays (DC Contactors)

EV Series

Panasonic EV Series DC Contactors are essentially Relays that combine compact design with cutoff at high DC voltages - something that Panasonic has achieved through contact technology with sealed capsules containing hydrogen gas. They are an eco-friendly design in choice for mobility applications. EV Series DC Contactors are available in 10A to 300A Types. Custom Type DC Contactors are also available from Panasonic.

Models table for series EV Series Relays (DC Contactors)
Part No.	Terminal Type	Coil Terminal Structure	Installation Type	Rated Coil Voltage	Contact Capacity	Protective Construction	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Rated Operating Power (at 20°C)	Max. applied voltage	Contact Arrangement	Contact Material	Nominal Switching Capacity (Resistive Load)	Max. Carring Current	Min. Switching Load (Resistive)	Contact Voltage Drop (Initial)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical Life (Resistive)	Expected Life: Switch-Off Life	Expected Life: Inrush Current (Capacitor)	Conditions	Weight (Typ.)	Inner Carton (Pieces)	Outer Carton (Pieces)	Short Circuit Capacity	Standard Packing	Usable Voltage Range
AEVS960122	Screw terminal	Faston terminal	Horizontal type	12V DC	60 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 1 V DC	0.375 A	32Ω	4.5 W	16V DC	1 Form A	Tungsten and copper alloys	60A 450V DC (Carry, 15mm² wire)	60A Continuity 100A 10 min. 180A 1 min. (15mm² wire)	1A 12V DC (at 20°C)	Max. 0.067 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,000 Vrms for 1min. (detection current: 10mA.)	2,000 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 50 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 100 Hz, 43 m/s² 100 to 200 Hz, 19.6 m/s²(detection time: 10 µs)	10 to 100 Hz, 43 m/s² 100 to 200 Hz, 19.6 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	60A 450V DC, Min. 800 operations	[Forward direction]: 600 A 300 V DC, Min. 5 operations 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	60 A 20 V DC, Min. 70,000 operations	[For usage] Ambient temperature: –40 to +80°C (When continuous steady current at 14 V DC:–40 to +65°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.) [For trasnport and storage] Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 240 g	1	20			10 V DC to 16 V DC
AEVS16012	Screw terminal	Lead wire	Vertical type	12V DC	60 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 1 V DC	0.375 A	32Ω	4.5 W	16V DC	1 Form A	Tungsten and copper alloys	60A 450V DC (Carry, 15mm² wire)	60A Continuity 100A 10 min. 180A 1 min. (15mm² wire)	1A 12V DC (at 20°C)	Max. 0.067 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 50 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 100 Hz, 43 m/s² 100 to 200 Hz, 19.6 m/s²(detection time: 10 µs)	10 to 100 Hz, 43 m/s² 100 to 200 Hz, 19.6 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	60A 450V DC, Min. 800 operations	[Forward direction]: 600 A 300 V DC, Min. 5 operations 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	60 A 20 V DC, Min. 70,000 operations	[For usage] Ambient temperature: –40 to +80°C (When continuous steady current at 14 V DC:–40 to +65°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.) [For trasnport and storage] Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 250 g	1	20			10 V DC to 16 V DC
AEVG16012	Screw terminal	Lead wire		12V DC	60 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 0.5 V DC	0.429 A	28Ω	5.2 W	16V DC	1 Form A	Copper alloy	60A 450V DC (Carry, 15mm² wire)	60A Continuity 120A 5 min. 180A 30 sec. (15mm² wire)	1A 12V DC (at 20°C)	Max. 0.15 V (by voltage drop 6 V DC 60 A )	Min. 100 MΩ (At 1,000 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 44.1 m/s² (detection time: 10 µs)	10 to 200 Hz, Min. 44.1 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵		400 A 300 V DC, Min. 1 operation (No polarity)	30 A 450 V DC, Min. 70,000 operations 120 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 165 g			4,500A (at Max. 10 ms), No smoke and No ignition	40 pieces (Carton 40 pieces / 1 tray)	10 V DC to 16 V DC
AEV19024	Screw terminal	Connector		24V DC	300 A	Capsule contact	Single side stable	Max. 18 V DC	Min. 4 V DC	1.85 A (Inrush)		Inrush: 44.4 W (approx. 0.1 sec.) Stable: 3.8 W	32V DC	1 Form A	Copper alloy	300A 450V DC (Carry, 100mm² wire)	300A Continuity 400A 10 min. 600A 1 min. (100mm² wire)	1A 24V DC (at 20°C)	Max. 0.06 V (300 A carry current)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 30 ms (without bounce)	Max. 10 ms	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 44.1 m/s² (detection time: 10 µs)	10 to 200 Hz, 44.1 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	300A 450V DC, Min. 1,000 operations	[Forward direction]: 2,500 A 300 V DC, Min. 3 operations 600 A 450 V DC, Min. 50 operations [Reverse direction]: -300 A 200 V DC, Min. 100 operations	240 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +85°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 750 g	1	5			20 V DC to 32 V DC
AEV17012	Screw terminal	Lead wire		12V DC	200 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 1 V DC	0.5 A	24Ω	6 W	16V DC	1 Form A	Copper alloy	200A 450V DC (Carry, 60mm² wire)	200A Continuity 300A 15 min. (60mm² wire)	1A 12V DC (at 20°C)	Max. 0.1 V (200 A carry current)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	200A 450V DC, Min. 3,000 operations	[Forward direction]: 2,000 A 350 V DC, Min. 1 operation 400 A 450 V DC, Min. 50 operations [Reverse direction]: -200 A 200 V DC, Min. 1,000 operations	140 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +85°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 600 g	1	10			10 V DC to 16 V DC
AEV110242	TM type	Faston terminal (with terminal protection cover)		24V DC	10 A	Capsule contact	Single side stable	Max. 18 V DC	Min. 2 V DC	0.052 A	464Ω	1.24 W	32V DC	1 Form A	Molybdenum	10A 450V DC (2mm² wire)	10A Continuity 15A 2 min. 30A 30 sec. (2mm² wire)	1A 12V DC (at 20°C)	Max. 0.5 V (by voltage drop 6 V DC 10 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 10⁵	10A 400V DC, Min. 75,000 operations 10A 450V DC, Min. 30,000 operations	Forward direction: 30 A 450 V DC, Min. 50 operations	30 A 400 V DC, Min. 50,000 operations 15 A 450 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C (Storage: Max. +85°C) Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 90 g	25	100			20 V DC to 32 V DC
AEV18024	Screw terminal	Connector		24V DC	80 A	Capsule contact	Single side stable	Max. 18 V DC	Min. 2 V DC	0.176 A	136Ω	4.2 W	32V DC	1 Form A	Tungsten and copper alloys	80A 450V DC (Carry, 15mm² wire)	80A Continuity 120A 15 min. 180A 20 min. (15mm² wire)	1A 12V DC (at 20°C)	Max. 0.067 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	80A 450V DC, Min. 1,000 operations	[Forward direction]: 800 A 300 V DC, Min. 1 operation 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	150 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 400 g	1	20			20 V DC to 32 V DC
AEV14012	Screw terminal	Connector		12V DC	120 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 1 V DC	0.353 A	34Ω	4.2 W	16V DC	1 Form A	Copper alloy	120A 450V DC (Carry, 38mm² wire)	120A Continuity 225A 3 min. 400A 30 sec. (38mm² wire)	1A 12V DC (at 20°C)	Max. 0.03 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	30A 450V DC, Min. 1,000 operations	[Forward direction]: 1,200 A 300 V DC, Min. 1 cycle 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	120 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 400 g	1	20			10 V DC to 16 V DC
AEV14024	Screw terminal	Connector		24V DC	120 A	Capsule contact	Single side stable	Max. 18 V DC	Min. 2 V DC	0.176 A	136Ω	4.2 W	32V DC	1 Form A	Copper alloy	120A 450V DC (Carry, 38mm² wire)	120A Continuity 225A 3 min. 400A 30 sec. (38mm² wire)	1A 12V DC (at 20°C)	Max. 0.03 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	30A 450V DC, Min. 1,000 operations	[Forward direction]: 1,200 A 300 V DC, Min. 1 cycle 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	120 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 400 g	1	20			20 V DC to 32 V DC
AEV18012	Screw terminal	Connector		12V DC	80 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 1 V DC	0.353 A	34Ω	4.2 W	16V DC	1 Form A	Tungsten and copper alloys	80A 450V DC (Carry, 15mm² wire)	80A Continuity 120A 15 min. 180A 20 min. (15mm² wire)	1A 12V DC (at 20°C)	Max. 0.067 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	80A 450V DC, Min. 1,000 operations	[Forward direction]: 800 A 300 V DC, Min. 1 operation 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	150 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 400 g	1	20			10 V DC to 16 V DC

Models table for series EV Series Relays (DC Contactors)
Part No.	Terminal Type	Coil Terminal Structure	Installation Type	Rated Coil Voltage	Contact Capacity	Protective Construction	Operating Function	Operate (Set) Voltage (at20°C) (Initial)	Release (Reset) voltage (at20°C) (Initial)	Rated Operating Current [±10%] (at 20°C)	Coil Resistance (At 20oC)	Rated Operating Power (at 20°C)	Max. applied voltage	Contact Arrangement	Contact Material	Nominal Switching Capacity (Resistive Load)	Max. Carring Current	Min. Switching Load (Resistive)	Contact Voltage Drop (Initial)	Insulation Resistance (Min. MΩ)(Initial)	Dielectric Strength (Between Open Contacts) (Initial)	Dielectric Strength (Between Contacts and Coil) (Initial)	Operate (Set) Time (At Rated Coil Voltage) (At 20oC) (Initial)	Release (Reset) Time (at Rated Coil Voltage) (at 20°C) (Initial)	Shock Resistance: Functional	Shock Resistance: Destructive	Vibration Resistance: Functional	Vibration Resistance: Destructive	Expected Life: Mechanical Life	Expected Life: Electrical Life (Resistive)	Expected Life: Switch-Off Life	Expected Life: Inrush Current (Capacitor)	Conditions	Weight (Typ.)	Inner Carton (Pieces)	Outer Carton (Pieces)	Short Circuit Capacity	Standard Packing	Usable Voltage Range
AEVS960122	Screw terminal	Faston terminal	Horizontal type	12V DC	60 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 1 V DC	0.375 A	32Ω	4.5 W	16V DC	1 Form A	Tungsten and copper alloys	60A 450V DC (Carry, 15mm² wire)	60A Continuity 100A 10 min. 180A 1 min. (15mm² wire)	1A 12V DC (at 20°C)	Max. 0.067 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,000 Vrms for 1min. (detection current: 10mA.)	2,000 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 50 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 100 Hz, 43 m/s² 100 to 200 Hz, 19.6 m/s²(detection time: 10 µs)	10 to 100 Hz, 43 m/s² 100 to 200 Hz, 19.6 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	60A 450V DC, Min. 800 operations	[Forward direction]: 600 A 300 V DC, Min. 5 operations 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	60 A 20 V DC, Min. 70,000 operations	[For usage] Ambient temperature: –40 to +80°C (When continuous steady current at 14 V DC:–40 to +65°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.) [For trasnport and storage] Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 240 g	1	20			10 V DC to 16 V DC
AEVS16012	Screw terminal	Lead wire	Vertical type	12V DC	60 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 1 V DC	0.375 A	32Ω	4.5 W	16V DC	1 Form A	Tungsten and copper alloys	60A 450V DC (Carry, 15mm² wire)	60A Continuity 100A 10 min. 180A 1 min. (15mm² wire)	1A 12V DC (at 20°C)	Max. 0.067 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 50 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 100 Hz, 43 m/s² 100 to 200 Hz, 19.6 m/s²(detection time: 10 µs)	10 to 100 Hz, 43 m/s² 100 to 200 Hz, 19.6 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	60A 450V DC, Min. 800 operations	[Forward direction]: 600 A 300 V DC, Min. 5 operations 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	60 A 20 V DC, Min. 70,000 operations	[For usage] Ambient temperature: –40 to +80°C (When continuous steady current at 14 V DC:–40 to +65°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.) [For trasnport and storage] Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 250 g	1	20			10 V DC to 16 V DC
AEVG16012	Screw terminal	Lead wire		12V DC	60 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 0.5 V DC	0.429 A	28Ω	5.2 W	16V DC	1 Form A	Copper alloy	60A 450V DC (Carry, 15mm² wire)	60A Continuity 120A 5 min. 180A 30 sec. (15mm² wire)	1A 12V DC (at 20°C)	Max. 0.15 V (by voltage drop 6 V DC 60 A )	Min. 100 MΩ (At 1,000 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 44.1 m/s² (detection time: 10 µs)	10 to 200 Hz, Min. 44.1 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵		400 A 300 V DC, Min. 1 operation (No polarity)	30 A 450 V DC, Min. 70,000 operations 120 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 165 g			4,500A (at Max. 10 ms), No smoke and No ignition	40 pieces (Carton 40 pieces / 1 tray)	10 V DC to 16 V DC
AEV19024	Screw terminal	Connector		24V DC	300 A	Capsule contact	Single side stable	Max. 18 V DC	Min. 4 V DC	1.85 A (Inrush)		Inrush: 44.4 W (approx. 0.1 sec.) Stable: 3.8 W	32V DC	1 Form A	Copper alloy	300A 450V DC (Carry, 100mm² wire)	300A Continuity 400A 10 min. 600A 1 min. (100mm² wire)	1A 24V DC (at 20°C)	Max. 0.06 V (300 A carry current)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 30 ms (without bounce)	Max. 10 ms	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 44.1 m/s² (detection time: 10 µs)	10 to 200 Hz, 44.1 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	300A 450V DC, Min. 1,000 operations	[Forward direction]: 2,500 A 300 V DC, Min. 3 operations 600 A 450 V DC, Min. 50 operations [Reverse direction]: -300 A 200 V DC, Min. 100 operations	240 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +85°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 750 g	1	5			20 V DC to 32 V DC
AEV17012	Screw terminal	Lead wire		12V DC	200 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 1 V DC	0.5 A	24Ω	6 W	16V DC	1 Form A	Copper alloy	200A 450V DC (Carry, 60mm² wire)	200A Continuity 300A 15 min. (60mm² wire)	1A 12V DC (at 20°C)	Max. 0.1 V (200 A carry current)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	200A 450V DC, Min. 3,000 operations	[Forward direction]: 2,000 A 350 V DC, Min. 1 operation 400 A 450 V DC, Min. 50 operations [Reverse direction]: -200 A 200 V DC, Min. 1,000 operations	140 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +85°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 600 g	1	10			10 V DC to 16 V DC
AEV110242	TM type	Faston terminal (with terminal protection cover)		24V DC	10 A	Capsule contact	Single side stable	Max. 18 V DC	Min. 2 V DC	0.052 A	464Ω	1.24 W	32V DC	1 Form A	Molybdenum	10A 450V DC (2mm² wire)	10A Continuity 15A 2 min. 30A 30 sec. (2mm² wire)	1A 12V DC (at 20°C)	Max. 0.5 V (by voltage drop 6 V DC 10 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 10⁵	10A 400V DC, Min. 75,000 operations 10A 450V DC, Min. 30,000 operations	Forward direction: 30 A 450 V DC, Min. 50 operations	30 A 400 V DC, Min. 50,000 operations 15 A 450 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C (Storage: Max. +85°C) Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 90 g	25	100			20 V DC to 32 V DC
AEV18024	Screw terminal	Connector		24V DC	80 A	Capsule contact	Single side stable	Max. 18 V DC	Min. 2 V DC	0.176 A	136Ω	4.2 W	32V DC	1 Form A	Tungsten and copper alloys	80A 450V DC (Carry, 15mm² wire)	80A Continuity 120A 15 min. 180A 20 min. (15mm² wire)	1A 12V DC (at 20°C)	Max. 0.067 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	80A 450V DC, Min. 1,000 operations	[Forward direction]: 800 A 300 V DC, Min. 1 operation 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	150 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 400 g	1	20			20 V DC to 32 V DC
AEV14012	Screw terminal	Connector		12V DC	120 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 1 V DC	0.353 A	34Ω	4.2 W	16V DC	1 Form A	Copper alloy	120A 450V DC (Carry, 38mm² wire)	120A Continuity 225A 3 min. 400A 30 sec. (38mm² wire)	1A 12V DC (at 20°C)	Max. 0.03 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	30A 450V DC, Min. 1,000 operations	[Forward direction]: 1,200 A 300 V DC, Min. 1 cycle 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	120 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 400 g	1	20			10 V DC to 16 V DC
AEV14024	Screw terminal	Connector		24V DC	120 A	Capsule contact	Single side stable	Max. 18 V DC	Min. 2 V DC	0.176 A	136Ω	4.2 W	32V DC	1 Form A	Copper alloy	120A 450V DC (Carry, 38mm² wire)	120A Continuity 225A 3 min. 400A 30 sec. (38mm² wire)	1A 12V DC (at 20°C)	Max. 0.03 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	30A 450V DC, Min. 1,000 operations	[Forward direction]: 1,200 A 300 V DC, Min. 1 cycle 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	120 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 400 g	1	20			20 V DC to 32 V DC
AEV18012	Screw terminal	Connector		12V DC	80 A	Capsule contact	Single side stable	Max. 9 V DC	Min. 1 V DC	0.353 A	34Ω	4.2 W	16V DC	1 Form A	Tungsten and copper alloys	80A 450V DC (Carry, 15mm² wire)	80A Continuity 120A 15 min. 180A 20 min. (15mm² wire)	1A 12V DC (at 20°C)	Max. 0.067 V (by voltage drop 6 V DC 20 A)	Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)	2,500 Vrms for 1min. (detection current: 10mA.)	2,500 Vrms for 1min. (detection current: 10mA.)	Max. 50 ms (without bounce)	Max. 30 ms (with no coil protective elements)	For ON: Min. 196 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs) For OFF: Min. 98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 µs)	Min. 490 m/s² (half-sine shock pulse: 6 ms)	10 to 200 Hz, 43 m/s² (detection time: 10 µs)	10 to 200 Hz, 43 m/s² (Time of vibration for each direction; X, Y, Z direction: 4 hours)	Min. 2 x 10⁵	80A 450V DC, Min. 1,000 operations	[Forward direction]: 800 A 300 V DC, Min. 1 operation 120 A 450 V DC, Min. 50 operations [Reverse direction]: -120 A 200 V DC, Min. 50 operations	150 A 20 V DC, Min. 70,000 operations	Ambient temperature: –40 to +80°C Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)	Approx. 400 g	1	20			10 V DC to 16 V DC