EV Series Relays (DC Contactors)

EV Series

Panasonic EV Series DC Contactors are essentially Relays that combine compact design with cutoff at high DC voltages - something that Panasonic has achieved through contact technology with sealed capsules containing hydrogen gas.  They are an eco-friendly design in choice for mobility applications.  EV Series DC Contactors are available in 10A to 300A Types.  Custom Type DC Contactors are also available from Panasonic.

the battery show

Join us at the Battery Show 2023!

Panasonic exhibits at the Battery Show and the Electric and Hybrid Vehicle Technology Expo 2023

Visit Panasonic at Booth #554 from Tuesday, September 12th to Thursday, September 14th, to discover our cutting-edge electronic component and device solutions for automotive applications. As a global leader in passive and electromechanical components, sensors, motors, and electronic devices, Panasonic Industry is dedicated to engineering high-performance, top-quality, and reliable products that meet the demanding standards of automotive OEMs and Tier 1, 2, and 3 suppliers. 

Part Number List

Results 15
Models table for series EV Series Relays (DC Contactors)
Part No.DatasheetTerminal TypeCoil Terminal StructureInstallation TypeRated Coil VoltageContact CapacityProtective ConstructionOperating Function Operate (Set) Voltage (at20°C) (Initial) Release (Reset) voltage (at20°C) (Initial)Rated Operating Current [±10%] (at 20°C)Coil Resistance (At 20oC)Rated Operating Power (at 20°C) Max. applied voltageContact ArrangementContact MaterialNominal Switching Capacity (Resistive Load) Max. Carring Current Min. Switching Load (Resistive) Contact Voltage Drop (Initial)Insulation Resistance (Min. MΩ)(Initial)Dielectric Strength (Between Open Contacts) (Initial)Dielectric Strength (Between Contacts and Coil) (Initial)Operate (Set) Time
(At Rated Coil Voltage) (At 20oC) (Initial)
Release (Reset) Time
(at Rated Coil Voltage) (at 20°C) (Initial)
Shock Resistance: Functional Shock Resistance: DestructiveVibration Resistance: FunctionalVibration Resistance: DestructiveExpected Life: Mechanical LifeExpected Life: Electrical Life (Resistive)Expected Life: Switch-Off LifeExpected Life: Inrush Current (Capacitor)ConditionsWeight (Typ.)Inner Carton (Pieces)Outer Carton (Pieces) Short Circuit Capacity Standard Packing Usable Voltage Range
Screw terminal
Faston terminal
Horizontal type
12V DC
60 A
Capsule contact
Single side stable
Max. 9 V DC
Min. 1 V DC
0.375 A
32Ω
4.5 W
16V DC
1 Form A
Tungsten and copper alloys
60A 450V DC (Carry, 15mm2 wire)
60A Continuity
100A 10 min.
180A 1 min. (15mm2 wire)
1A 12V DC (at 20°C)
Max. 0.067 V (by voltage drop 6 V DC 20 A)
Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,000 Vrms for 1min. (detection current: 10mA.)
2,000 Vrms for 1min. (detection current: 10mA.)
Max. 50 ms (without bounce)
Max. 50 ms (with no coil protective elements)
For ON: Min. 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
For OFF: Min. 98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Min. 490 m/s2 (half-sine shock pulse: 6 ms)
10 to 100 Hz, 43 m/s2
100 to 200 Hz, 19.6 m/s2(detection time: 10 µs)
10 to 100 Hz, 43 m/s2
100 to 200 Hz, 19.6 m/s2 (Time of vibration for each direction; X, Y, Z direction: 4 hours)
Min. 2 x 105
60A 450V DC, Min. 800 operations
[Forward direction]:
600 A 300 V DC, Min. 5 operations
120 A 450 V DC, Min. 50 operations
[Reverse direction]: -120 A 200 V DC, Min. 50 operations
60 A 20 V DC, Min. 70,000 operations
[For usage] Ambient temperature: –40 to +80°C (When continuous steady current at 14 V DC:–40 to +65°C
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
[For trasnport and storage] Ambient temperature: –40 to +80°C
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
Approx. 240 g
1
20
10 V DC to 16 V DC
Screw terminal
Lead wire
Vertical type
12V DC
60 A
Capsule contact
Single side stable
Max. 9 V DC
Min. 1 V DC
0.375 A
32Ω
4.5 W
16V DC
1 Form A
Tungsten and copper alloys
60A 450V DC (Carry, 15mm2 wire)
60A Continuity
100A 10 min.
180A 1 min. (15mm2 wire)
1A 12V DC (at 20°C)
Max. 0.067 V (by voltage drop 6 V DC 20 A)
Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1min. (detection current: 10mA.)
2,500 Vrms for 1min. (detection current: 10mA.)
Max. 50 ms (without bounce)
Max. 50 ms (with no coil protective elements)
For ON: Min. 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
For OFF: Min. 98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Min. 490 m/s2 (half-sine shock pulse: 6 ms)
10 to 100 Hz, 43 m/s2
100 to 200 Hz, 19.6 m/s2(detection time: 10 µs)
10 to 100 Hz, 43 m/s2
100 to 200 Hz, 19.6 m/s2 (Time of vibration for each direction; X, Y, Z direction: 4 hours)
Min. 2 x 105
60A 450V DC, Min. 800 operations
[Forward direction]:
600 A 300 V DC, Min. 5 operations
120 A 450 V DC, Min. 50 operations
[Reverse direction]: -120 A 200 V DC, Min. 50 operations
60 A 20 V DC, Min. 70,000 operations
[For usage] Ambient temperature: –40 to +80°C (When continuous steady current at 14 V DC:–40 to +65°C
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
[For trasnport and storage] Ambient temperature: –40 to +80°C
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
Approx. 250 g
1
20
10 V DC to 16 V DC
Screw terminal
Lead wire
12V DC
60 A
Capsule contact
Single side stable
Max. 9 V DC
Min. 0.5 V DC
0.429 A
28Ω
5.2 W
16V DC
1 Form A
Copper alloy
60A 450V DC (Carry, 15mm2 wire)
60A Continuity
120A 5 min.
180A 30 sec. (15mm2 wire)
1A 12V DC (at 20°C)
Max. 0.15 V (by voltage drop 6 V DC 60 A )
Min. 100 MΩ (At 1,000 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1min. (detection current: 10mA.)
2,500 Vrms for 1min. (detection current: 10mA.)
Max. 50 ms (without bounce)
Max. 30 ms (with no coil protective elements)
For ON: Min. 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
For OFF: Min. 98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Min. 490 m/s2 (half-sine shock pulse: 6 ms)
10 to 200 Hz, 44.1 m/s2 (detection time: 10 µs)
10 to 200 Hz, Min. 44.1 m/s2 (Time of vibration for each direction; X, Y, Z direction: 4 hours)
Min. 2 x 105
400 A 300 V DC, Min. 1 operation (No polarity)
30 A 450 V DC, Min. 70,000 operations
120 A 20 V DC, Min. 70,000 operations
Ambient temperature: –40 to +80°C
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
Approx. 165 g
4,500A (at Max. 10 ms), No smoke and No ignition
40 pieces (Carton 40 pieces / 1 tray)
10 V DC to 16 V DC
TM type
Faston terminal (with terminal protection cover)
24V DC
10 A
Capsule contact
Single side stable
Max. 18 V DC
Min. 2 V DC
0.052 A
464Ω
1.24 W
32V DC
1 Form A
Molybdenum
10A 450V DC (2mm2 wire)
10A Continuity
15A 2 min.
30A 30 sec. (2mm2 wire)
1A 12V DC (at 20°C)
Max. 0.5 V (by voltage drop 6 V DC 10 A)
Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1min. (detection current: 10mA.)
2,500 Vrms for 1min. (detection current: 10mA.)
Max. 50 ms (without bounce)
Max. 30 ms (with no coil protective elements)
For ON: Min. 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
For OFF: Min. 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Min. 490 m/s2 (half-sine shock pulse: 6 ms)
10 to 200 Hz, 43 m/s2 (detection time: 10 µs)
10 to 200 Hz, 43 m/s2 (Time of vibration for each direction; X, Y, Z direction: 4 hours)
Min. 105
10A 400V DC, Min. 75,000 operations
10A 450V DC, Min. 30,000 operations
Forward direction: 30 A 450 V DC, Min. 50 operations
30 A 400 V DC, Min. 50,000 operations
15 A 450 V DC, Min. 70,000 operations
Ambient temperature: –40 to +80°C (Storage: Max. +85°C)
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
Approx. 90 g
25
100
20 V DC to 32 V DC
Screw terminal
Lead wire
12V DC
200 A
Capsule contact
Single side stable
Max. 9 V DC
Min. 1 V DC
0.5 A
24Ω
6 W
16V DC
1 Form A
Copper alloy
200A 450V DC (Carry, 60mm2 wire)
200A Continuity
300A 15 min. (60mm2 wire)
1A 12V DC (at 20°C)
Max. 0.1 V (200 A carry current)
Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1min. (detection current: 10mA.)
2,500 Vrms for 1min. (detection current: 10mA.)
Max. 50 ms (without bounce)
Max. 30 ms (with no coil protective elements)
For ON: Min. 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
For OFF: Min. 98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Min. 490 m/s2 (half-sine shock pulse: 6 ms)
10 to 200 Hz, 43 m/s2 (detection time: 10 µs)
10 to 200 Hz, 43 m/s2 (Time of vibration for each direction; X, Y, Z direction: 4 hours)
Min. 2 x 105
200A 450V DC, Min. 3,000 operations
[Forward direction]:
2,000 A 350 V DC, Min. 1 operation
400 A 450 V DC, Min. 50 operations
[Reverse direction]: -200 A 200 V DC, Min. 1,000 operations
140 A 20 V DC, Min. 70,000 operations
Ambient temperature: –40 to +85°C
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
Approx. 600 g
1
10
10 V DC to 16 V DC
Screw terminal
Connector
24V DC
300 A
Capsule contact
Single side stable
Max. 18 V DC
Min. 4 V DC
1.85 A (Inrush)
Inrush: 44.4 W (approx. 0.1 sec.)
Stable: 3.8 W
32V DC
1 Form A
Copper alloy
300A 450V DC (Carry, 100mm2 wire)
300A Continuity
400A 10 min.
600A 1 min.
(100mm2 wire)
1A 24V DC (at 20°C)
Max. 0.06 V (300 A carry current)
Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1min. (detection current: 10mA.)
2,500 Vrms for 1min. (detection current: 10mA.)
Max. 30 ms (without bounce)
Max. 10 ms
For ON: Min. 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
For OFF: Min. 98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Min. 490 m/s2 (half-sine shock pulse: 6 ms)
10 to 200 Hz, 44.1 m/s2 (detection time: 10 µs)
10 to 200 Hz, 44.1 m/s2 (Time of vibration for each direction; X, Y, Z direction: 4 hours)
Min. 2 x 105
300A 450V DC, Min. 1,000 operations
[Forward direction]:
2,500 A 300 V DC, Min. 3 operations
600 A 450 V DC, Min. 50 operations
[Reverse direction]: -300 A 200 V DC, Min. 100 operations
240 A 20 V DC, Min. 70,000 operations
Ambient temperature: –40 to +85°C
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
Approx. 750 g
1
5
20 V DC to 32 V DC
Screw terminal
Connector
12V DC
120 A
Capsule contact
Single side stable
Max. 9 V DC
Min. 1 V DC
0.353 A
34Ω
4.2 W
16V DC
1 Form A
Copper alloy
120A 450V DC (Carry, 38mm2 wire)
120A Continuity
225A 3 min.
400A 30 sec. (38mm2 wire)
1A 12V DC (at 20°C)
Max. 0.03 V (by voltage drop 6 V DC 20 A)
Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1min. (detection current: 10mA.)
2,500 Vrms for 1min. (detection current: 10mA.)
Max. 50 ms (without bounce)
Max. 30 ms (with no coil protective elements)
For ON: Min. 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
For OFF: Min. 98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Min. 490 m/s2 (half-sine shock pulse: 6 ms)
10 to 200 Hz, 43 m/s2 (detection time: 10 µs)
10 to 200 Hz, 43 m/s2 (Time of vibration for each direction; X, Y, Z direction: 4 hours)
Min. 2 x 105
30A 450V DC, Min. 1,000 operations
[Forward direction]:
1,200 A 300 V DC, Min. 1 cycle
120 A 450 V DC, Min. 50 operations
[Reverse direction]: -120 A 200 V DC, Min. 50 operations
120 A 20 V DC, Min. 70,000 operations
Ambient temperature: –40 to +80°C
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
Approx. 400 g
1
20
10 V DC to 16 V DC
Screw terminal
Connector
24V DC
120 A
Capsule contact
Single side stable
Max. 18 V DC
Min. 2 V DC
0.176 A
136Ω
4.2 W
32V DC
1 Form A
Copper alloy
120A 450V DC (Carry, 38mm2 wire)
120A Continuity
225A 3 min.
400A 30 sec. (38mm2 wire)
1A 12V DC (at 20°C)
Max. 0.03 V (by voltage drop 6 V DC 20 A)
Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1min. (detection current: 10mA.)
2,500 Vrms for 1min. (detection current: 10mA.)
Max. 50 ms (without bounce)
Max. 30 ms (with no coil protective elements)
For ON: Min. 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
For OFF: Min. 98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Min. 490 m/s2 (half-sine shock pulse: 6 ms)
10 to 200 Hz, 43 m/s2 (detection time: 10 µs)
10 to 200 Hz, 43 m/s2 (Time of vibration for each direction; X, Y, Z direction: 4 hours)
Min. 2 x 105
30A 450V DC, Min. 1,000 operations
[Forward direction]:
1,200 A 300 V DC, Min. 1 cycle
120 A 450 V DC, Min. 50 operations
[Reverse direction]: -120 A 200 V DC, Min. 50 operations
120 A 20 V DC, Min. 70,000 operations
Ambient temperature: –40 to +80°C
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
Approx. 400 g
1
20
20 V DC to 32 V DC
Screw terminal
Connector
12V DC
80 A
Capsule contact
Single side stable
Max. 9 V DC
Min. 1 V DC
0.353 A
34Ω
4.2 W
16V DC
1 Form A
Tungsten and copper alloys
80A 450V DC (Carry, 15mm2 wire)
80A Continuity
120A 15 min.
180A 20 min. (15mm2 wire)
1A 12V DC (at 20°C)
Max. 0.067 V (by voltage drop 6 V DC 20 A)
Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1min. (detection current: 10mA.)
2,500 Vrms for 1min. (detection current: 10mA.)
Max. 50 ms (without bounce)
Max. 30 ms (with no coil protective elements)
For ON: Min. 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
For OFF: Min. 98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Min. 490 m/s2 (half-sine shock pulse: 6 ms)
10 to 200 Hz, 43 m/s2 (detection time: 10 µs)
10 to 200 Hz, 43 m/s2 (Time of vibration for each direction; X, Y, Z direction: 4 hours)
Min. 2 x 105
80A 450V DC, Min. 1,000 operations
[Forward direction]:
800 A 300 V DC, Min. 1 operation
120 A 450 V DC, Min. 50 operations
[Reverse direction]: -120 A 200 V DC, Min. 50 operations
150 A 20 V DC, Min. 70,000 operations
Ambient temperature: –40 to +80°C
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
Approx. 400 g
1
20
10 V DC to 16 V DC
Screw terminal
Connector
24V DC
80 A
Capsule contact
Single side stable
Max. 18 V DC
Min. 2 V DC
0.176 A
136Ω
4.2 W
32V DC
1 Form A
Tungsten and copper alloys
80A 450V DC (Carry, 15mm2 wire)
80A Continuity
120A 15 min.
180A 20 min. (15mm2 wire)
1A 12V DC (at 20°C)
Max. 0.067 V (by voltage drop 6 V DC 20 A)
Min. 100 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
2,500 Vrms for 1min. (detection current: 10mA.)
2,500 Vrms for 1min. (detection current: 10mA.)
Max. 50 ms (without bounce)
Max. 30 ms (with no coil protective elements)
For ON: Min. 196 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
For OFF: Min. 98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Min. 490 m/s2 (half-sine shock pulse: 6 ms)
10 to 200 Hz, 43 m/s2 (detection time: 10 µs)
10 to 200 Hz, 43 m/s2 (Time of vibration for each direction; X, Y, Z direction: 4 hours)
Min. 2 x 105
80A 450V DC, Min. 1,000 operations
[Forward direction]:
800 A 300 V DC, Min. 1 operation
120 A 450 V DC, Min. 50 operations
[Reverse direction]: -120 A 200 V DC, Min. 50 operations
150 A 20 V DC, Min. 70,000 operations
Ambient temperature: –40 to +80°C
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°C.)
Approx. 400 g
1
20
20 V DC to 32 V DC

What's New

Stay up to date