The Panasonic BEYOLEX™ Series of stretchable circuit materials facilitate the design and manufacturing of single-sided, double-sided, multilayer, and hybrid circuits that are stretchable, conformable, and reliable.
The New EKMB & EKMC Series "Ultra Slight Motion" & "Wide Area Detection" PIR Sensors have a high signal-to-noise ratio which ensures the prevention of false triggers and an advanced Pyrelectric sensor design that improves the accuracy of detection.
The EYG-R Series is now available in 250 µm and 350 µm thickness options. An ideal Thermal Interface Material (TIM) solution, the New EYG-R Series GraphiteTIM material is designed with high compressibility characteristics to reduce contact thermal resistance between rough surfaces.
The Photovoltaic MOSFET High Power Driver is available in a small package size (SSOP) with a higher short circuit current and drop-out voltage to MOSFET's gate. Capable of driving high Vgs MOSFET such as SiC MOSFETs, this Driver is capable of high switching capacities at high switching speeds.
The TQC Series POSCAP™ Capacitors utilize a sintered tantalum anode and a proprietary high conductivity polymer for a cathode. Panasonic’s innovative construction and processing yields the lowest ESR level in polymer tantalum technology and exhibits excellent performance in high-frequency applications.
The ASQMR1 Series Seal Type Snap Action Switches feature an installed Resistor that protects circuits thus preventing malfunctions such as disconnection and wiring short circuits. Resistor installed Switches contribute to device miniaturization and decreased weight by not requiring a separate Resistor on the board.
The PAN1781 Series RF Module is a high technology device featuring the Nordic nRF52820 Single-Chip Controller and is ideal for IoT Wireless Connectivity applications! In addition, the ultra-low current consumption of the PAN1781 Series makes the Module an ideal choice for Battery-powered devices.
The HF 1 Form A High Capacity PhotoMOS® Relays are 1200V High Capacity PhotoMOS® Relays and offer a suitable substitution for replacing reed and mercury Relays. In addition, the HF 1 Form A High Capacity PhotoMOS® Relays offer high load switching for both industrial and test equipment applications.
The ECQ-UA Series Metallized Polypropylene Film Capacitors deliver stable capacitance levels over the product lifetime and higher reliability of the application. In addition, it features an operating temperature range of -40°C to 110°C, with a rated voltage of 275V.AC up to 310 V.AC, and a nominal capacitance range of 0.1μF up to 10μF.
The EKMB & EKMC Series "Ultra Slight Motion" & "Wide Area Detection" PIR Sensors have a high signal-to-noise ratio which ensures the prevention of false triggers and an advanced Pyrelectric sensor design that improves the accuracy of detection. These sensors are suitable for battery-free devices at a standard current consumption of 170micro A.
The EVP-BT Series Tactile Switches offer up to 2 million operating life cycles, a thin height profile of 4.3mm, and two terminal options. In addition, the EVP-BT Series Tactile Switch line-up is available in J-Bent and Straight terminal options to accommodate different push forces and vibrations.
The R35K Narrow (Fine) Pitch Connector Series is an ultra-small 0.35mm pitch socket and header Connector pair that is available in a 4-pin solution. This Connector Series uses power terminals on each end of the Connector to transmit 3A continuous current allowing for the connection of small Battery-powered devices.
The ERZ-E11AxxxSx Series Radial Leaded Disc ZNR® Transient / Surge Absorbers feature outstanding performance, small diameter size, and a broad operating temperature range of -40°C to +125°C. ZNR devices are used to protect electronic equipment against voltage surges and save board space and cost.
The EEH-ZS(U) Series (Surface Mount, High Temperature Reflow) Conductive Polymer Hybrid Aluminum Capacitors are capable of operating at high temperatures with conductive Polymer Capacitor performance and Aluminum Electrolytic Capacitor safety in a Surface Mount package. These AEC-Q200 qualified parts ensure optimal quality and reliability.
The EV-A Series can withstand up to an 8,000A short circuit current rating and has a high cut-off capability of 1,800A @ 500VDC without requiring any contact polarity. This Automotive Relay is suitable for usage in Electric Vehicles, DC Charging Stations and other high voltage DC applications such as Hybrid Construction Equipment.
The “Flat Square Lens” Type PIR Motion Sensors consist of lens to create various detection zones, an optical filter to block non-infrared light, Pyroelectric sensing elements, and an impedance converter to get an electrical signal. Panasonic also integrates an amplifier and comparator circuit on the same chip all densely packed inside the stem block.
The PAN9520 Series RF Module is a 2.4 GHz 802.11 b/g/n Embedded Wi‑Fi RF Module based on Espressif ESP32-S2 that includes the powerful Xtensa® 32-bit LX7 CPU. An integrated chip antenna and QSPI memory enable the PAN9520 Series RF Module to be used in a variety of stand-alone or host-controlled applications.
The TB Series Automotive Relays are available in a variety of contact arrangements including 1 Form A, 1 Form C, and twin type 1 Form C x 2 (8 Pins) and 1 Form C x 2 (10 Pins) construction type options. These Relays are compact and offer ideal DC control with a high-capacity 25A load switching capability suitable for miniature PC board design.
The EYG-R Series GraphiteTIM (Compressible Type) PGS With Low Thermal Resistance Thermal Management material is now available in 250 µm and 350 µm thickness options. An ideal Thermal Interface Material (TIM) solution, the New EYG-R Series GraphiteTIM material is designed with high compressibility characteristics to reduce contact thermal resistance between rough surfaces.